PDF Archive

Easily share your PDF documents with your contacts, on the Web and Social Networks.

Share a file Manage my documents Convert Recover PDF Search Help Contact

Pumpkin Tablerunner Binder .pdf

Original filename: Pumpkin Tablerunner Binder.pdf

This PDF 1.4 document has been generated by pdftk 1.41 - www.pdftk.com / itext-paulo-155 (itextpdf.sf.net-lowagie.com), and has been sent on pdf-archive.com on 09/12/2011 at 00:55, from IP address 75.92.x.x. The current document download page has been viewed 900 times.
File size: 1.6 MB (3 pages).
Privacy: public file

Download original PDF file

Document preview



pumpkin Tablerunner

Size: 33” X 18”
Designed by Jan Patek

Pumpkin Tablerunner/Wallhanging
Size 33” x 18”
Designed by Jan Patek
Fabric Requirements:

(All measurements include seam allowances)

1/4 yd for pumpkin backgrounds & dark sawtooths
Fat 1/8 or 1/8 yd of 3 for pumpkins
1/8 yd for pumpkin markings, stems and light in sawtooths
1/4 yd for outer border & sawtooths
1/4 yd for binding


Cut and piece 3 pumpkin blocks using instructions on recipe card. Make only the
pumpkin sections and remember that the entire pumpkin part is made out of the
same fabric.
Using Freezer Paper Applique instructions cut out pumpkin markings and stem.
Applique to pumpkins.
Sew 3 pumpkin blocks into a vertical row.
Make sixteen 3” finished half square triangles. Since you only have 5 triangle
squares of two of the color combinations you have to cut and make 1 extra in
those 2 combinations. Use triangle paper or cut nine 3 7/8” squares of light
fabric. Cut three 3 7/8 squares of the dark fabrics. Cut in half diagonally and
sew one light to one dark. Trim and press to dark. This will give you one extra
triangle square in 2 of the color combinations.
Sew 9 of the triangle squares into a horizontal row and sew to the bottom.
Cut a 27 1/2” x 3 1/2” outer border and sew to the top.
Cut a 3 1/2” x 15 1/2” outer border and sew a triangle square to the top. Sew to
the left side.
Sew 6 triangle squares in a vertical row and sew to the right side.
Cut 3, 3R
Quilt as desired & bind.

Freezer Paper Applique:
Draw on the matte side and iron shiny side to fabric (iron to the wrong side if
you need the pattern reversed). Draw your templates the exact size, do not add
seam allowances. Cut out freezer paper templates. Iron onto right side of fabric and cut out adding ¼” seam allowance. Mark around templates with colored
pencil or chalk. This line will help you know where to needle turn. I like to use
a sandpaper board to help hold the fabric in place while I’m tracing around the
shape. Peel off freezer paper.
Freezer paper appliqué templates are reusable.
Place the shapes on the background.
Pin, glue stick or baste the shapes into place on the background.
Applique in place referring to photo.
(C) Jan Patek Quilts 2011

Pumpkin Tablerunner Binder.pdf - page 1/3
Pumpkin Tablerunner Binder.pdf - page 2/3
Pumpkin Tablerunner Binder.pdf - page 3/3

Related documents

pumpkin tablerunner binder
pumpkin tablerunner binder
7048 w10 ms 1
7048 w08 ms 1
the argentine experience recipes 1
bermuda triangle

Related keywords