understanding how cafeteras de capsula1273 .pdf
Original filename: understanding how cafeteras de capsula1273.pdf
This PDF 1.4 document has been generated by / iTextSharp™ 5.4.1 ©2000-2012 1T3XT BVBA (AGPL-version), and has been sent on pdf-archive.com on 24/05/2013 at 09:00, from IP address 122.169.x.x.
The current document download page has been viewed 716 times.
File size: 40 KB (2 pages).
Privacy: public file
Download original PDF file
understanding how cafeteras de capsula
There are many types of cafeteras de capsula available and they come in different designs. That
being said, there are many features that they share in common, and knowing how a typical
coffeemaker works will come in handy in case problems arise.
The Main Components
There are three main components in a coffeemaker, the first being the reservoir where water is
poured prior to brewing the pot. Another major component is a tube which carries hot water to the
mechanism, the third part, the mechanism that pours the water over the coffee grounds.
At the base of the coffee machine is a wire coil, which serves as the device's resistive heating
element and it heats up when electricity goes through it. This element, which makes contact with
the warming plate's bottom, is layered with white grease which is used to spread heat uniformly.
The coffee machine's on / off switch is used to control the heating element, and when it is turned
on, is controlled by sensors.
An aluminum tube can be found on the other end of the heating element, and this connected to
the reservoir by way of a tube. This tube is connected to the top of a tube found in most coffee
machines. Even those Cafeteras De Capsula Al Mejor Precio are designed this way.
How a Coffee Machine Operates
It is this aluminum tube that keeps the water hot. For the water to be forced through the tube
rather than the reservoir, these machines are equipped with a one-way valve set between the
aluminum tube and the other tubes. This allows cold water to keep flowing into the aluminum tube
but doesn't allow the hot water to go back to the tube.
More details is available Click Here
If cold water is poured into the reservoir, the water flows into the tube past the valve and straight
into the aluminum tube. Once the coffeemaker switch has been activated, the resistive element
gets hot and keeps the water hot until the aluminum tube begins to boil. This pushes up the
boiling water and subsequently it is sprayed all over the coffee grounds that are in the coffee
maker. As the water soaks in the coffee grounds, essential oils are released.
If you want to know more about Cafeteras de capsula you may go to
http://www.squidoo.com/cafeteras-de-capsula-logrando-un-buen-caf. This website has
comprehensive reviews of many popular coffee machines as well as information about coffee