industrial adhesives .pdf
Original filename: industrial adhesives.pdf
This PDF 1.5 document has been generated by Microsoft® Office Word 2007, and has been sent on pdf-archive.com on 11/02/2014 at 04:40, from IP address 112.134.x.x.
The current document download page has been viewed 403 times.
File size: 207 KB (1 page).
Privacy: public file
Download original PDF file
Creating strong and permanent bonding between metals
Latest materials along with the engineering practices need various kinds of adhesives
for creating the strong bonds in between the parts and the pieces. Bonds are designed
for the attachment at the time of manufacturing processes and for the repair purposes
subsequent to the failure. The initial and critical step about bonding is to find proper as
well as appropriate bonding adhesive which works efficiently with materials which
are getting bonded. The working time and the properties of adhesive should be
measured for scenario to work which result in the long-lasting as well as stable bond of
Incorrect preparation of bonding surfaces is usually the cause of the bond failure. So, it
is critical to attain great contact with bonding surfaces and with the materials beneath
outer surface. Few materials like the PVC as well as ABS plastic may have surface
treated with liquid primer for creating the bonding surface. Few materials needs
removal of physical material and use the sanding as well as grinding to disturb the
substrate of material to create the great bond. Irrespective of the material, every surface
coatings as well as contaminants should get removed from contact area of industrial
It is however very important to use the high strength adhesive for strong bonding or for
combining 2 metals together. Basically there are 2 kinds of bonding such as mechanical
as well as chemical. The Chemical bonding generally creates the bond in between actual
composition of material and pieces. On the other hand Mechanical bonding makes the
bond by attaching adhesive all around the irregularities of the surface of part surface,
which clearly explains that why we wish rough surface for good premier bond. Rough
surfaces provide us much surface area for adhesive to get in contact, on the other hand
the Smooth surfaces will not offer a because of profile of the high as well as low areas
which would contact the bonding glue or adhesive.
The parts which are properly created get industrial aerosol adhesive applied on them
and then they are pressed all together to keep good contact in them as much as possible.
However, it is also significant to minimize distance in between the parts for minimizing
stress which is placed on adhesive for their job.