Beginners Guide for Wood Pellets Production Procedure .pdf
Original filename: Beginners Guide for Wood Pellets Production Procedure.pdf
Title: � Azeus Machinery Co.ltd
This PDF 1.7 document has been generated by WPS Office 个人版 / , and has been sent on pdf-archive.com on 09/02/2015 at 03:23, from IP address 104.143.x.x.
The current document download page has been viewed 537 times.
File size: 337 KB (4 pages).
Privacy: public file
Download original PDF file
Azeus Machinery Co.ltd
Beginners Guide for Wood Pellets Production Procedure
Keywords: wood pellets,wood pellets production,wood pellet making,wood pellet
machine,wood hammer mill, wood crusher
Raw Materials for Wood Pellets: round wood, wood logs, wood slabs,.wood
branches, wood chips, wood shaving, wood sawdust, wood leaves, wood waste from
Wood Pellets Making Equipment: wood crusher, wood sawdust dryer, wood pellet
machine, wood pellet cooler, automatic packing machine
Description for Wood Pellet Produce Procedure
In industries, the procedure of wood pellets production mainly departs in the
following steps: wood material crushing, water moisture control, biomass pelletizing,
wood pellets cooling, wood pellets weighing and packing. In a wood pellet line, the
pelletizing process is the most important. Equaling to the pelletizing part, the die and
the roller is the most important part in a pellet machine.
wood material crushing:As a general rule, the size of raw material should always
smaller than the pellets size. For wood logs or round wood, crushing process by a
wood crusher is needed. Then the smaller wood blocks will be fed into the wood
chipper to chip the wood into chips for further use. If you want to make pellets with a
size of 6mm, or smaller, you will need a wood hammer mill to make the wood chips
into wood sawdust with a size not bigger than 6mm.
water moisture control:To make premium wood pellets, the water moisture of the
raw material should be about 12%. So it is necessary to remove excess water from the
raw material. In industrial pellets production, a wood pellet cooler is usually adopted.
For small-scale, You choose to dry the material in the sun or other methods.
biomass pelletizing:Wood material through a feeder come into the pelletizing room,
where the die and the rollers are motioning relatively at a high speed. With the
extrusion force and the high temperature forming in the relative motion, the
intermolecular forces in wood material molecule have changed. Thus the plasticity of
the wood materials has increased. Then the materials are shaped into pellets by the
hole on the die and pushed out.
wood pellets cooling:The pellets come out of the pellet machine is hot and wet.
A pellet cooler is used to bring the temperature down and reduce the water content.
After cooling, they are harder and easier to store or transport.
wood pellets weighing and packing:A wood pellet packing machine can pack the
pellets in plastic bags with the same weight for transport or for sale. For a large
quantity of wood pellets, bulk trucks are need. Bulk pellets are loaded from the pellet
mill directly into trucks for delivery to bulk storage containers. The bulk trucks are
more expensive than regular flatbed trucks, but a much more efficient system of