DVDFab Blu ray Creator .pdf
Original filename: DVDFab Blu-ray Creator.pdf
This PDF 1.5 document has been generated by Microsoft® Office Word 2007, and has been sent on pdf-archive.com on 09/02/2015 at 13:30, from IP address 61.244.x.x.
The current document download page has been viewed 629 times.
File size: 613 KB (15 pages).
Privacy: public file
Download original PDF file
As a powerful and professional Blu-ray creator and Blu-ray burner software, DVDFab Blu-ray Creator can convert and burn
videos in the following formats: MKV, MP4, AVI, M2TS, TS, MOV, WMV, WMA, 3GP, FLV, M4V, VOB, etc. And the output
Blu-ray can be BD-R, BD-RE, BD-50, BD-25, BD-9, and BD-5.
Convert MKV to Blu-ray
Step 1: Run DVDFab -> Creator, choose Blu-ray Creator
Run DVDFab and select Creator option. Make sure the mode shown on the left panel is Blu-ray Create. If not, please click on the mode icon to go to select Blu-ray
Step 2: Import in the source
Click Add button to load the source video. You can also drag the source file into the program. Seconds later the source will be in with audio and subtitles changeable.
If you want to convert more videos, just continue to load them in.
Now move to the left panel to choose the output size/type then go to the bottom to specify a storage path for a Blu-ray folder or an ISO image file. If you want to burn
the content into a blank BD, just connect a Blu-ray drive to your PC then select the drive (after conversion process begins, you’ll be prompted to insert a compatible
disc to start the write process, just do it).
Step 3: Create and customize the Blu-ray menu
Click the above Next button then you will be led to create and customize the Blu-ray menu for the output. If you don’t want any Blu-ray menu, select “No Menu” on
the right panel and click Next.
In the next window, you can rename the Volume Label and set the Playback Mode.
Step 4: Start conversion if everything is OK
After all settings are all right, hit the Start button on the main interface to start conversion. All detailed progress info can be viewed during the process, and the PC
can be set to shut down or hibernate, or the program to exit, when all tasks are done.
Convert FLV to Blu-ray
Step 1: Run DVDFab Blu-ray Creator
Run DVDFab, choose Creator. Now on the left panel, click the mode icon to select Blu-ray Creator, if the default icon is not showing Blu-ray Creator.
Step 2: Load the source, specify output size, type and storage path
Click Add button to load the FLV video for conversion. Or drag the video into DVDFab program. One or two seconds later the source will be in. Continue to add more
if you want to convert more videos to a Blu-ray.
Navigate to the left panel to specify the output size from BD25, BD50, BD9 and BD5. Then go to the “Save to” menu to select a storage path for the output Blu-ray
movie folder or image file. If you want to burn the content into a disc, connect a Blu-ray drive to your PC then choose the drive here.
Step 3: Create Blu-ray menu
Now you are in the Blu-ray menu creation window. Here you can customize the Blu-ray menu for output, you can also select “No Menu” on the right panel to skip this
Next to change the volume label and set playback mode.
Step 4: Start conversion
Hit Start button to start conversion. During the process, you can set your PC to shut down or hibernate, or set DVDFab to exit, when all tasks are done.
Convert MP4 to Blu-ray
Step 1: Run DVDFab, go to Creator to choose Blu-ray Creator
Run DVDFab and go to Creator option. Click the mode icon on the left panel to choose Blu-ray Creator option if the default mode is not what you want. Now Blu-ray
Creator has been enabled.