Retractable Hydraulic Trailer Jack .pdf
Original filename: Retractable Hydraulic Trailer Jack.pdf
This PDF 1.5 document has been generated by Microsoft® Word 2010, and has been sent on pdf-archive.com on 18/02/2015 at 13:04, from IP address 122.161.x.x.
The current document download page has been viewed 540 times.
File size: 591 KB (4 pages).
Privacy: public file
Download original PDF file
Hydraulic Jacks for Gooseneck & Tag
Trailers and Equipment
The Powerjack System is a Rugged, Dependable, Hydraulic Trailer jack system. Powerjack
Systems provides an easy method of attaching and detaching the trailer, loaded or empty.
Double R Industries Inc has brought you a jack tough enough to work in the extreme conditions
found in the Oil Field, the Construction and Utility Industries, and the Farm. The Powerjack
System is a hydraulic lift for your trailer. A six position lock stand holds your trailer in place
when not in use, loaded or empty. The Powerjack System will work with most hydraulic
sources. Our system components make it function properly.
The Powered Lock Stand™ makes it possible to operate the jacks from inside the cab of your
truck or tractor.
The Powerjack System is available for Gooseneck and Tag trailers with up to 15,000 lbs of hitch
weight or a trailer rated at 60,000 lbs with up to 25% of the weight allocated to the jacks.
Benefits of Powerjack Systems™
Saves minutes every time you attach or detach a trailer
Effortless controls simplifies use for every age group
Helps keep personnel free from moving equipment
Mechanical lock stand allows loaded trailer storage with no settling
Can be operated with wireless remote controls allowing in cab operation
Works for towed implements or trailers
Features of Powerjack Systems™
5000, and 7500 lb. capacities
Easily welded or bolted to the trailer/implement
Lock stand system stores trailer/implement at six different heights under no hydraulic
3000 to 10,000 psi hydraulic systems
Redesigned foot plate for increased lift height and improved weight distribution
Can be added to most existing hydraulic systems
Powered Lock Stand™ Option
At Powerjack Systems we have taken the work out of our already easy to use jacks. The
Powered Lock Stand™ allows you to use the wireless remote to lift your trailer off of the hitch
and set it down in a mechanical lock stand while others are still dropping the legs on their screw
jacks and just starting the task of manhandling the jack handle.
Making Your Job Faster, Safer, and Easier.
With the new Powered Lock Stand™ you no longer need to stand next to the trailer or
implement while it’s lowering onto your hitch. A button on the multifunction remote activates
the cylinder to move the lock stand out of the way while the trailer lifts off the lock stand. See
the video of the system in action HERE!
Powerjack Systems Powered Lock Stand™.
Available for Powerjack 5000™, and Powerjack 7500LP™ models.
Works with Trailers, Ag Equipment, and Construction/Utility equipment.
Works with Truck, Tractor, onboard hydraulics or electric power units.
Replaces the lock stand control handle and cross tube on dual leg systems
The Powered Lock Stand™ allows you to…
Use a wireless remote from your cab
Use your tractor remote valve from the cab
Use a remote or tool circuit from your truck
Work with more control in a safer environment
Make better use of your time
The following galleries are photos taken of trailers with Powerjacks installed. While the photos
were taken at each respective manufacturer lot, these trailers are currently in use by the
companies that purchased them.
Felling FT-40-2 LP Trailer
The Felling Trailer is a 40,000 lb capacity trailer, and was purchased by Diamond Surfacing in
Minnesota. It in employs a dual Powerjack 7500 – 10,000 PSI system, with an Enerpac XA12
Powerjack 7500 with Air Powered Hydraulics on D&K Pole Trailers
3980 300th ST
Boyden, IA 51234