PDF Archive

Easily share your PDF documents with your contacts, on the Web and Social Networks.

Share a file Manage my documents Convert Recover PDF Search Help Contact



CLS Breather Adapters Brochure .pdf


Original filename: CLS-Breather-Adapters-Brochure.pdf
Author: LL Deb Laptop

This PDF 1.5 document has been generated by Microsoft® Publisher 2013, and has been sent on pdf-archive.com on 19/05/2015 at 11:15, from IP address 210.56.x.x. The current document download page has been viewed 252 times.
File size: 600 KB (2 pages).
Privacy: public file




Download original PDF file









Document preview


Designed for use in any environment or process and with any fluid CLS brand breather adapters
are constructed entirely of stainless steel with seamless joins & no internal threaded connections to
cause oil or air leaks or trap contaminants.
CLS brand breather adapters are manufactured by Clean Lube Solutions to exceed quality standards
within the lubrication industry.
DESCRIPTION

Clean Lube Solutions introduces two reservoir adapters that compliment their range of oil sample tubes and fittings:
1.
2.

CLS Breather Adapter – Dispenser (LL-BAD-001)
CLS Breather Adapter – Dispenser & Sampler (LL-BADS-001)

CLS breather adapters are constructed entirely of 316 stainless steel with seamless joins and no threaded connections to
cause oil or air leaks or trap contaminants. The stainless steel construction enables them to be used in any environment or
process and with any fluid.
The unique internal porting design of these adapters allows for a relatively short unit (120mm) thereby not fouling on system
components and hoses. All of the adapter functions (breather, sampling or dispensing) have their own dedicated flow path,
not allowing dispensed oil to travel into the breather.
The porting size of the adapters provides a low pressure drop when re-circulating viscous lube oils (220-680cSt) using a
filtration unit.
A stainless steel flange adapter is also available to connect to standard tank breather/filler caps.
APPLICATIONS
Clean Lube Solutions’ range of breather adapters are designed to be used as part of a complete cleanliness control
strategy. It is paramount that oil systems be kept sealed at all times, including oil sampling, oil dispensing and fluid level
monitoring procedures. These adapters ensure that at NO TIME is the oil system open to the environment thus disallowing
the ingress of contaminants (both particles and moisture) and particularly in areas where high levels of airborne
contaminants are present.

For more information on any of our products, services or training courses please visit us online at:
Clean Lube Solutions Pty Ltd
07 3800 9444
info@cleanlubesolutions.com.au
www.cleanlubesolutions.com.au

3/ 78-80 Eastern Rd
Browns Plains, Qld 4280, Australia
ABN: 67 116 189 701

FEATURES
A system that is configured for total contamination exclusion will possess the following attributes:
1. Have a good 3 micron air breather installed, with a focus on eliminating the ingress of both solid atmospheric dust and
moisture from humidity, weather or wash-downs. A variety of quality products are available according to the system conditions
and the installation should be elevated to a minimum of 100mm above the equipment surface.
2. Have a dedicated sample valve and permanent drop tube installed to prevent the opening of the system and assuring
consistent sampling from the same location.
3. Have quick connect couplings installed both top and bottom to ensure the system is sealed when topping up with new oil and
also when connecting a recirculation filtration unit.
3 micron desiccant breather

Permanent sample
valve & drop tube

Top-up & recirculation
quick connect
Bottom filtration recirculation
quick connect

ADAPTER SPECIFICIATIONS
Breather Adapter – Dispenser
Material:

(LL-BAD-001)
316 Stainless steel

Adapter Length:

130mm (120mm inserted)

Tank Connection:

¾” BSP male thread

Breather Connection:

1” BSP female thread

Dispenser Connection:

¾” BSP male thread

Breather Adapter – Dispenser & Sampler (LL-BADS-001)
Material:

316 Stainless steel

Adapter Length:

120mm (110mm inserted)

Tank Connection:

1” BSP male thread

Breather Connection:

1” BSP female thread

Dispenser Connection:

¾” BSP male thread

Sampler:

¼” BSP female thread

Breather Adapter Flange
Material:

(LL-BAF-001)
316 Stainless steel

Adapter Height:

20mm

Tank Connection:

Flange with 6 x screws, 73mm PCD

Adapter Connection:

1” BSP female thread

For more information on any of our products, services or training courses please visit us online at:
Clean Lube Solutions Pty Ltd
07 3800 9444
info@cleanlubesolutions.com.au
www.cleanlubesolutions.com.au

3/ 78-80 Eastern Rd
Browns Plains, Qld 4280, Australia
ABN: 67 116 189 701


CLS-Breather-Adapters-Brochure.pdf - page 1/2
CLS-Breather-Adapters-Brochure.pdf - page 2/2

Related documents


cls breather adapters brochure
ul listed flexible droppers in india by monsher
techniques and tips you need1578
utilizing stainless steel bearings for application
hefilter temperature resistance air filter
digital pressure gauge xy pg260


Related keywords