This PDF 1.4 document has been generated by , and has been sent on pdf-archive.com on 20/07/2015 at 17:06, from IP address 77.251.x.x.
The current document download page has been viewed 669 times.
File size: 601.04 KB (12 pages).
Privacy: public file
Magnetic heater inspired by energy
www.emolio.com/MagneticHeater
This is FREE document with much less informations and without technical drawings.
For FULL document with technical drawings go to
http://www.emolio.com/MagneticHeater
This is FREE document with NO much details, like technical (CAD) drawings.
For FULL document with technical drawings go to
http://www.emolio.com/MagneticHeater
Magnetic heater description
The magnetic system is a multifunctional system designed for central heating. This means that
it can be adapted to existing central heating systems, as well as different applications. One of
the ways the system works is that it heats the water that heats your home. The other option is to
heat thermal oil, which then heats the water in the buffer which then heats your home. It is the
choice of the user, we must specify that the option of heating the thermal oil brings greater
efficiency in spending the energy.
The magnetic system is based on the principle of natural law (Lentz law) copper as non ferro
metal reacts to magnetic induction by creating heat. This principle has long been used in the
auto industry as well as on certain appliances such as air conditioners. Magnetic heating in this
application is a new design (construction) for implementing lowenergyuse heating systems.
The purpose of this document is to use this opportunity (open source) to share, help and
encourage consumers to make their own magnetic system, which compared to others is the
most effective heating of modern times. We have to state that you need professional help in the
construction of the magnetic system. From us you can expect such support, information, training
courses, books, parts as well as a complete magnetic heating machine. In our case it is
handwork rather than mass production and all profit goes to developing this or any other energy
systems that helps you as consumer to use less energy.
The durability of the device is only limited to the replacement of certain parts (such as an
electric motor), the durability of the other parts is very longterm. The basic machine is running
smoothly with minimal maintenance. It is important to note that the current model of magnetic
heating works on a threephase electrical energy motor, and that future systems will be adapted
to single phase electromotor. The device is a noncomplicated magnetic heating device which
has a steel construction to support all parts such as an electric motor (with a difference of power
from 1 to 5 kw / h), aluminium disk, magnets, copper cauldrons and the necessary electronics
that regulate the turning on and off and it is connected to a thermostat that measures the
temperature of water or thermal oil.
The principle of operation is based on magnetic induction, so the electric motor runs the
aluminum disk in which a number of magnets has been integrated. The field of magnetic
induction is created when the disk reaches a certain speed and the copper reacts on that with
heating up. So the copper cauldron heats up due to the magnetic induction and the heat is
transferred to water or thermal oil (as already stated in the document). The principle of operation
is simple and all of the energy used is by electric motors.
Use and efficiency of magnetic heating depends on the existing central heating system where
you place the magnetic heating, as well as the square footage of space that is heated. The
entire unit of the magnetic heating system runs on low power consumption and can be
customized, for instance by adapting the distance between the disk with magnets and the
copper cauldron. A larger distance, calls for less power consumption. The user can customize
the temperature in relation to personal wishes as to minimal and maximal temperature in the
home. Compared to existing systems, magnetic heating uses a minimal amount of electricity
and is very efficient when it comes to saving electricity. In addition, please note that the
magnetic heater does not require additional maintenance such as cleaning, neither does it
create emission of CO2. In other words, the system is 100% functional with minimal
maintenance costs and high financial benefits due to the lower electrical inputs .
For more details about everything read on ...
This is FREE document with NO much details, like technical (CAD) drawings.
For FULL document with technical drawings go to
http://www.emolio.com/MagneticHeater
Foreword
My personal experience I gained after purchasing our house (240 square meters) in which there
was a warming system based on oil fuel. I want to use this opportunity to show you that
choosing to install the magnetic heater pays off in one year.;
The seller of the house informed us that 2,000 liters of heating oil on an annual basis would be
enough to heat the house, but already the first winter season I realized that the heating needs
more than double of that. Faced with this fact I reviewed all existing systems and came to the
conclusion that it would be profitable to try to make a magnetic system that could reduce the
consumption with at least 70%. An additional advantage, and in my opinion an important one, is
that the magnetic system is much more healthy than using oil or gas. And so it all began …
In the beginning it took me a long time to understand in what way I should address the basic
issues, my experiments have led to the development of this heating unit. My search has
resulted in a product that is ready for use and is currently the most efficient.
Just to mention some of the main points / problems I encountered: copper parts should be
professionally welded and safe to withstand the pressure of minimum 3 bar / the copper part
that I use can work at 8 bar, finding out what electric motor (kw/h) is best for a certain output in
relation to either heating water or thermal oil magnets should be placed under the rules of
north / south and alternately, Disk needs to be precise the distance between the disk and the
boiler is adjustable, and the same is dependent consumption, etc ... These are all points that
you need to pay attention to when making or setting up the system. It is important to call for the
support of a professional plumber and electro technician. For all your questions you can contact
me …
Everything has a beginning and an end, but this project has been one of which I am very glad
that despite all the attempts we have managed to make a magnetic heater. And I hope that
others will learn from my experience, therefore, do not have to start from scratch, will experience
less failures and achieve greater efficiency.
In this era of innovation, energy saving is increasingly represented as a major theme. Outdated
technologies are replaced with new systems that are adapted depending on the existing
suppliers. Users, understandably, are interested in whether an investment will be profitable and
worthwhile. We are proud to say that the magnetic heating system is reliable and economical on
the long run, plus easy to install and maintain. We can, from personal experience, say that the
magnetic system meets all the requirements expected of modern technology era. We have
already had our investment paid back, and each new winter is saving on heating. The system is
installed by using the existing hot and cold water pipes. (I like to mention that it is profitable to
think about changing to floor and/or wall heating instead of using radiators) , builtin electronics
regulate automatic switching the motor on and off which helps save energy. in addition it is an
builtin security that the system will not overheat. There is no need for maintenance and
cleaning, nor is there exhaust gas in the house.
In short we are satisfied, and we want you the have the same experience....
This is FREE document with NO much details, like technical (CAD) drawings.
For FULL document with technical drawings go to
http://www.emolio.com/MagneticHeater
Parts of magnetic heater:
1. Aluminum disk with magnets
2. Copper boiler
3. Electromotor
4. Construction which holds all parts
5. Electric parts, such as thermostat and on/off switch
This is FREE document with NO much details, like technical (CAD) drawings.
For FULL document with technical drawings go to
http://www.emolio.com/MagneticHeater
Aluminium disk with magnets
For the disk with magnets we have chosen aluminium, because this material is light, easy to
adapt, it can endure the necessary heat of the unit and and it does not deform. When preparing
This is FREE document with NO much details, like technical (CAD) drawings.
For FULL document with technical drawings go to
http://www.emolio.com/MagneticHeater
Copper boiler
I have chosen copper as the material for the boiler or cauldron simply because copper reacts to
magnetic induction. This thermal energy is passed on to water or thermal oil, which in turn are
This is FREE document with NO much details, like technical (CAD) drawings.
For FULL document with technical drawings go to
http://www.emolio.com/MagneticHeater
Electro motor
The electric motor is the basis of the magnetic heating and responsible for the level of energy
use. For this reason I would suggest you choose an engine with an appropriate strength (we
1434385544_1 (5).pdf (PDF, 601.04 KB)
Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..
Use the short link to share your document on Twitter or by text message (SMS)
Copy the following HTML code to share your document on a Website or Blog