Clear dome epoxy sticker .pdf
Original filename: Clear dome epoxy sticker.pdf
Title: Microsoft Word - New Microsoft Office Word Document
This PDF 1.3 document has been generated by C:\Program Files\Microsoft Office\Office12\WINWORD.EXE / Foxit PDF Creator Version 2.0.0 build 0725, and has been sent on pdf-archive.com on 04/10/2015 at 04:35, from IP address 117.200.x.x.
The current document download page has been viewed 356 times.
File size: 10 KB (1 page).
Privacy: public file
Download original PDF file
Clear dome epoxy sticker
Smooth floors, like hardwood and tiles, can become easily slippery. An easy option is to put carpet down
instead, but certain areas should not have carpet, like kitchens and bathrooms. This is why applying an
anti-skid tile treatment is the best option. Clear dome epoxy sticker
Tile, marble, vinyl, and linoleum are placed in the same rooms as sinks, showers, and bathtubs. This
increases the chances of slipping occurring. Kitchens, bathrooms, and laundry rooms are common areas
where accidents from slick floors occur.
Buying sprays and lacquers is a cheaper and easier solution than replacing all of the floors in the home.
These can be applied to increase a floor's slip resistance. Anti-slip sprays and paints can be purchased
through various online companies. They are applied to tile, ceramic, porcelain, unfinished concrete, and
some types of marble and granite.
Spray or paint should be applied directly to the flooring after being thoroughly cleaned. The treatment
should sit on the floor for fifteen minutes and then should be washed away. This leaves a coating of antislip coverage on the flooring. The treatment will need to be reapplied over time, but it is less expensive
than replacing existing floors for slip resistance.
Online companies also offer aerosol epoxy sprays for homes. They come in convenient premixed cans
that only require one step to apply. The epoxy formula is sprayed over bathtubs, showers, stairs,
garages, or patios to create synthetic grit. This reduces the slip properties of the applied surface.
To apply epoxy sprays, the surface needs to first be dry, clean, and free of any oil, wax, dirt, loose paint,
or other containments. The epoxy should be sprayed in a sweeping motion at a distance of 12 to 15
inches for area to be properly treated. 3d sticker
The surface will be dry to touch in one hour. In 24 hours, the area is ready for heavy foot traffic. The
spray should be reapplied as needed, which is usually every six to twelve months. The same amount of
time should be used to measure any other sprays or paints applied to the surface to make it non-slip.
There are other ways to prevent slips and falls in the home by buying anti-slip accessories for the floor,
rugs, and mats. They are inexpensive and easy to install. Rubber or foam stickers can be place
underneath bath mats and rugs in the kitchen, laundry room, or patios to prevent them from moving or
sliding when stepped on. This reduces the risk of slipping and falling in these areas.
Bathtub liners can be purchased as most home improvement, drug, and grocery stores. Rubber inserts
are placed at the bottom of the bath or shower. The instantly cover otherwise slippery materials like tile,
ceramic, and other smooth bathroom flooring materials. It is an easy and inexpensive way to prevent