PDF Archive

Easily share your PDF documents with your contacts, on the Web and Social Networks.

Share a file Manage my documents Convert Recover PDF Search Help Contact



Stump grinding .pdf


Original filename: Stump grinding.pdf
Title: Microsoft Word - Stump grinding
Author: owner

This PDF 1.3 document has been generated by C:\Program Files\Microsoft Office\Office12\WINWORD.EXE / Foxit PDF Creator Version 2.0.0 build 0725, and has been sent on pdf-archive.com on 21/10/2015 at 05:56, from IP address 117.200.x.x. The current document download page has been viewed 380 times.
File size: 9 KB (1 page).
Privacy: public file




Download original PDF file









Document preview


Stump grinding
The typical way to remove a tree involves using a chainsaw but there are different ways to
utilize this process. If it is a tall tree they will generally require a bucket truck to remove the
tree. This is a truck with a hydraulic platform that lifts the tree cutter high into the air beside
the tree to be cut down. During this process the tree cutter will cut the tree into sections to
remove it. Using this method it will help to eliminate the potential of having a large tall tree
drop onto a roadway, fence, home, or other buildings. The worker could also climb the tree and
cut the limbs while in the tree. Stump grinding
When the crew arrives to remove the tree often they find that it is towering over a roadway,
home, or building, which creates a problem. The tree limbs that will be cut cannot be dropped
without creating a hazard or damaging property. The most practical way to take care of this
problem is lower the limbs that were cut to the ground using a rope. Before the limb is cut a
rope is attached to it and once cut it can be lowered down and avoid any contact with traffic or
structures. Depending on the size of the limbs and the location of the hazard it may take more
than one rope to get the limbs safely to the ground.
In spite of what you see in movies about cutting the tree at the bottom and letting it fall most
trees are actually removed from the top down. Once all the limbs are cut off, the trunk can be
tipped over or cut down, depending on the size of the tree. The bigger limbs are cut into
firewood after the smaller branches are removed and then loaded onto a truck. Stump
grinding cost
The last step to removing a tree is to cut down the trunk. In order to get the entire trunk to the
ground safely most will be cut into portions several times. The tree cutters must make sure that
the tree can be handled safely once it is on the ground, whether whole or in portions. In some
companies they will use a loader to lift the trunk in sections and put them on the trailer to be
hauled away. The last section of the tree trunk is sawed off close to the ground. To leave the
stump or remove it will be the property owner's decision. If the property owner wants it
removed he can have the company use a stump grinder to grind it out.
If you do not have experience cutting down trees you should an expert tree cutter to do the job
correctly and safely.


Document preview Stump grinding.pdf - page 1/1

Related documents


PDF Document stump grinding
PDF Document stump removal
PDF Document brisbane tree lopping
PDF Document discover tree removal experts1205
PDF Document stump grinding carbrook
PDF Document stump grinding cedar grove


Related keywords