Sales Flyer November December.pdf

Preview of PDF document sales-flyer-november-december.pdf

Page 1 2 3 45664

Text preview

Race Supply Warehouse

Notched Tube Mount Shock Brackets

25-5/8" Wide 5 Aluminum Axle Tube,

Brackets are notched for
1-1/2" - 1-3/4" round tubing
to create a gusset style
mount that welds on three
sides. Notched design positions the
bracket perpendicular to the tubing at a
90 degree angle and includes 1/2” shock mounting hardware.
Part No.

Long Two Position (1” CTC)



Extra Long Three Position (1” CTC)


ALL68201 $199.99 Each

Aluminum axle tube has a 3" O.D., a
2.500" I.D., and is machined for spool
seal ALL72140.

Axle Retainers For Ford 9" Cut
To Fit Flanged Axles
Text coming.
Part No.

Round Tube Mount Shock Bracket
ALL60115 $14.99 Each
Bracket welds onto round tubing and mounts
parallel with tubing. Bracket is typically
mounted above or below tubing and includes
1/2” shock mounting hardware. Three mounting positions are on 1” centers.

2.5" Coil Over Kit
For Track Evolution Series
With 7" Sleeve, Fox
ALL64131 $46.99 Each
Kit includes everything to assemble
one complete shock.

Medium Press-In Lower Ball Joint Sleeve
ALL56253 $9.79 Each
Steel sleeve allows custom fabrication of control
arms. Fits Allstar ball joint ALL56212.

5/8" Bent Tie Rod, 18" Long
ALL57024 $22.49 Each


Axle Retainer For Large Bearing,
Late Torino Style
Axle Retainer For Large Bearing,
Early Style

Universal Ford 9" Axle Housing Seal
ALL72099 $31.99 Each
Place seal inside the axle tube near the center
section to keep rear end lube in the center section
area of most floating axle style rear end housings.
Universal seal works with most 3" O.D. axle tubes
regardless of wall thickness. Internal seal diameter
of .975" works with most 28- and 31-spline axles.

Wall Mount
Radiator Holder Kit
ALL12216 $84.99 Each
Brackets fasten to trailer wall and
hold radiator safely in place during
transport to avoid damage. Kit includes
two 29" long aluminum brackets with
adjustment holes at 2" increments and
arms to fit radiator cores up to 2-1/4"
wide. Adjustable arms are slotted for
quick adjustment with included thumbscrew knobs to fit a variety of radiator

Typically used with factory style inner tie rod end and a rod end style
outer. Tube is constructed of .160" wall tubing with 5/8"-18LH threads on
the straight end and 5/8"-18RH threads on the curved end.


Phone No: (757-826-1073) - Prices Valid Through (12/31/2015)