PDF Archive

Easily share your PDF documents with your contacts, on the Web and Social Networks.

Share a file Manage my documents Convert Recover PDF Search Help Contact

Through Hole Installation Guide .pdf

Original filename: Through-Hole-Installation-Guide.pdf

This PDF 1.7 document has been generated by Adobe InDesign CS6 (Windows) / Adobe PDF Library 10.0.1, and has been sent on pdf-archive.com on 27/11/2015 at 08:13, from IP address 104.250.x.x. The current document download page has been viewed 329 times.
File size: 289 KB (1 page).
Privacy: public file

Download original PDF file

Document preview

Professional slip ring supplier.
Your best partner for 360° rotating solution.

Through Hole Installation Guide

Through Hole Slip Ring
Shaft mounted units:
1. Position the slip ring in the desired location and
tighten four set screws ( not supplied ) to the shaft.
2. Route the wiring and make the necessary
connections. Do not allow the wiring to restrict free
rotation of the slip ring. Do not constrain wiring such
that wire flexing ( cold working ) occurs. Doing so will
ultimately cause failure ( breakage of the wiring )


Flange mounted units:
1. Align the mounting holes in the flange to mounting
base and install flat washers and mounting screws (
not supplied ). Securely tighten screws.
2. Route the wiring and make the necessar
connections. Do not allow the wiring to restrict free
rotation of the slip ring

Because of possible geometric mismatching
between the customer’s application and the
slip ring, hard mounting of both ends of the slip
ring ( for example, securing the rotor and stator
such that is No floating during operation ) is not
recommended and may cause premature failure.
Make sure slip ring should be kept in the range of
specification indication.

Installation Drawing:

www.barlintimes.com · sales@barlintimes.com · +86-755-2871-4687

Document preview Through-Hole-Installation-Guide.pdf - page 1/1

Related documents

through hole installation guide
emf upper balljoint installation directions
ventline 2049 vb0156 00
capsule type installation guide
documentation gaku face plate and housing version 1 1
civic hood repair handle

Related keywords