Original filename: Eurothane.pdf
This PDF 1.7 document has been generated by Adobe InDesign CS6 (Macintosh) / Adobe PDF Library 10.0.1, and has been sent on pdf-archive.com on 28/11/2015 at 17:43, from IP address 93.38.x.x.
The current document download page has been viewed 428 times.
File size: 98 KB (1 page).
Privacy: public file
Download original PDF file
Eurothane.pdf (PDF, 98 KB)
Share on social networks
Link to this file download page
Discover Eurothane® G,
insulation and plaster-board
in one single handy panel
Keymark quality label
High insulating value (λD = 0.023 W/mK)
Ideal for lofts, walls and ceilings
Choice of 3 formats
Saves lots of space
Easy to install
Sturdy plasterboard that retains its shape
Easy to paint or paper over
Save time and space for your lofts, walls or ceilings
Eurothane® G is the ideal solution for interior insulation that is ready for painting or papering – in one
single gesture. With Eurothane® G you can insulate walls, lofts and ceilings from inside and paint or paper them
in no time at all.
Vapour control layer
Thermal conductibility λd
(in compliance with NBN EN 12667): 0.023 W/mK
Eurothane® G insulation with plasterboard has a core of rigid PIR foam that is covered on one side with
plasterboard. Between the plasterboard and the insulation material there is also a vapour control layer. Thanks
to the strong, durable insulating value (λd = 0,023 W/mK) you only need a thin panel of Eurothane® G. So you
achieve the perfect insulation and save space inside.
You can fix the full-height Eurothane® G insulation panels with an adhesive mortar, adhesive foam or
mechanically on an aligned support structure. The small Eurothane® G panels should always be attached to an
aligned structure of slats. When applying to a structure you can use the special plasterboard screws.
• Keymark 001-BK-514-0004-0006-W012
• Production of these insulation panels is ISO
9001:2008 and ISO 14001:2004 certified
• Core volume weight of the PIR foam: approx 30 kg/m3
• Vapour control layer between plaster and PIR
• Vapour diffusion resistance μ of the PIR foam: 50-100
ISOFLEX INSULATION Ltd
You finish the joints and inner and outer edges just as easily as normal plasterboard sheets. So that you save a lot
of time and money.
Link to this page
Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..
Use the short link to share your document on Twitter or by text message (SMS)
Copy the following HTML code to share your document on a Website or Blog