IMG 20151208 0002 .pdf

File information


Original filename: IMG_20151208_0002.pdf

This PDF 1.4 document has been generated by RAD PDF / RAD PDF 2.32.2.2 - http://www.radpdf.com, and has been sent on pdf-archive.com on 08/12/2015 at 07:53, from IP address 220.233.x.x. The current document download page has been viewed 409 times.
File size: 1.6 MB (1 page).
Privacy: public file


Download original PDF file


IMG_20151208_0002.pdf (PDF, 1.6 MB)


Share on social networks



Link to this file download page



Document preview


2. DeviceActivate & Charge

Bluetooth 4.0 device application OS

Make sure power is working normally before initial use. In case device is
under low battery connect the device to the charger. Device

rill
*"_

Android 4.3 &

above

will

automatically boot up (please clamp the charging clip to the back 3 point
position of bracelet

Supporl

as

below)

P

How to Use
Once the dcvice connected to thc app successfully, it

will rccord

Sleep monitoring mode: Long press key anytime until there is a silent

3. Please make sure the device is not under low battery.

vibration to enter in sleep

problem after full charge, please contact us.

-:i:::i"'::::"]:l:eping

monitoring'

li'"""-""-****ri

and

on the device to switch into different display

rril;r{ i!Ii
ill! IIO:IIII:IE

modes as following:

i__*__-__=.*___________-r

analyze your activities and sleep status automatically, please press the key

i,*-----ii
Activities Record:

distance and calorie consumption in the app;
Pedometer Mode: Press one more time based on Time Mode

'll

The smart band need to pair with the smart phone through app. Before

r^:,--

*- -*:--l- :.---::-- -l

ii 11200 n
iiFll
i- r-:- - ':_::*":-

downloading, please refer to working condition for mobile.
Searching the QR code, scan and download app.

I

Please use the QR code Scan tool to scan the following QR code and open
the link and download app. In case there is any problcm to open the link,

3. Pair the device

please try to copy the link and open it by browser.

Please make sure the Bluetooth is ON and then open app "Veryfit 2.0" and
go to bind. When searching and pairing device, please press on the key
device and activate the device (screen on). App

Please search and download the "Veryfit 2.0" from App Store or Google

automatically, choose the device name and connect the device to the app.

will

Calories Mode: Press one more time based on Pedometer Mode

of

Way to download 2: Search in the phone market and download.

play store.

will

be abnormal when reboot. Please

reboot the Bluetooth or reboot smart phone for pairing device.

Restore Factory Defaults

Make sure the device is connected with app, go in the app, enter "MineSystem Setting" and choose "Reboot Device".

Record daily activities, you could check daily activities including steps,

Download Veryfit 2.0 app

l:

still

connect the device with app?

Some smart phone Bluetooth service

OHow to

Quick Start Guide

Way to download

there is

Time Mode: Press once to activatc thc dcvicc and show current time

Functions lnstruction

l.

OCan't

lf

-Il

search the device

ir

Sleep Monitoring:

Device could automatically recognize your status and monitoring the whole

ml

update the device

Make sure the device is connected with app, go in the app "Device-Device
update", please wait some minutes before update done.

sleep progress with analyzing the deep sleep and light sleep hours;
Remind Alerts:

Alarm alert, call alert, sedentary alert, etc. by silent vibration;

Basic Specifications

Anti-Lost:
When the smart phone is beyond the Bluetooth range (no more than 5m),

CPU: Nordic

the device vibratcs to rcmind.

Sensor: kionix kx022-1020

Remote Camera Control:

Host Weight:

Device key could control remote photograph shooting.

Battery Type: Rechargeable Li Battery

r 111 il

Distance Mode: Press one more time based on Calories Mode

OHow to

nRF51822

2lg

Battery Capacity: 50mAh

FAQ

Data Sync: Bluetooth 4.0
Working Temperature: -10C--45

C

C) Can't find device when pairing device?

Waterproof: not for swimming or diving

l.

Standby time: 15 days

Please make sure the smart phone Bluetooth is ON and smart phone OS

&

above

Android 4.3 & above and iOS 7.1 & above.
2. Please make sure the distance between phone and device is no more than

This product is applied by professional Bluetooth RF signal and

0.5m, device is among the normal Bluetooth communication distance range

own-developed algorithm, the accuracy can reach 95oh and above.

(within

10m).


Document preview IMG_20151208_0002.pdf - page 1/1


Related documents


img 20151208 0002
paper
es12 quick start guide
5555555555
wherigo101android
es12 user manual

Link to this page


Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..

Short link

Use the short link to share your document on Twitter or by text message (SMS)

HTML Code

Copy the following HTML code to share your document on a Website or Blog

QR Code

QR Code link to PDF file IMG_20151208_0002.pdf