Whirlston Copper Wire Granulator .pdf
Original filename: Whirlston Copper Wire Granulator.pdf
This PDF 1.7 document has been generated by WPS Office / , and has been sent on pdf-archive.com on 09/12/2015 at 03:20, from IP address 107.191.x.x.
The current document download page has been viewed 590 times.
File size: 180 KB (4 pages).
Privacy: public file
Download original PDF file
Whirlston Automatic Copper Cable Granulator
Contact Email: email@example.com
Introduction of Whirlston Copper Cable
Whirlston automatic copper cable granulator is well known for best recycling effect and
reasonable price. We all know that copper cable granualtor is to recycle copper wire with
insulation,which gets copper granule through crushing and separating. The key factor to
judge whether the copper granualtor is good or not is the purity of copper granule. The
copper granule you get from Whirlston copper granulator is of high purity, up to 99.99%,
therefore quality is guaranteed.
Mini 400 Copper Wire Granulator
Mini 400 copper cable granulator is and
processing machine for recycling
automotive wires, communication cables and
other types of miscellaneous wires and cables
within 20 mm. For single conductor with
diameter of 0.2-0.3mm, the machine performs
best. Mini 400 cable granulator is suitable for
small scale recycling business. Its copper out put is 80-100kg/h.
Features of Mini400 Copper Cable Granulator
1. Controlled by electricity control panel, highly automatic.
2. Integrated structure, small dimensions, easy to move, saving space.
3. Low power consumption, stable performance.
4. Minimum copper recycling rate can reach 99.99%.
5. No water is needed, no dust, no environmental pollution.
Model 400 Copper Cable Granulator
Model 400 copper cable granulator is designed for recovering copper granules from
various scrap wires and cables. The machine adopts air and vibration instead of water to
separate copper granules and plastic pieces, having high recycling rate. The plastic
pieces can also be recycled. Its copper output is 150-200kg/h
Features of 400 Scrap Copper Granulator
1. Manual feeding material for one time,
adopting electricity control panel to control
the whole system, stable performance.
2. Equipped with dust collector, no dust
3. Adopting air and vibration separation, no
4. The voltage can be customized according
to your requirements
How Does the Cable Granulator Work?
After feeding scrap wires and cables into the recycling machine, they are chopped by the
chopper to have plastic pieces and copper granules, which are then sent to be separated
by airflow and vibration. Copper granules come out of the machine from the front outlet
and plastic pieces from the back outlet. Dust is collected by dust collector.
Model 600 Copper Wire Granulator
Model 600 copper wire granualtor has
similar structure with model 400. Its
difference is having larger productivity.
The copper output is 300-400kg/h. At
the same time, it keeps good
performance in copper recycling.
Working Process of 600
1. Press the buttons in sequence to start the machine till it is completely started.
2. Feed scrap copper wires and cables into the chopper, and adjust the airlock to the best
position according to the output.
3. Copper granules and plastic pieces are separated by vibrating and air separation.
4. Copper granules come out of the front outlet and plastics out of the back outlet.
Meanwhile dust is sent to dust collector via air duct.
5. Press the buttons in sequence to close the machine.
Model 800 Large Copper Cable Granulator
Model 800 copper cable granulator is a
complete set of production line for large
scale recycling. By using our cable
granulater, not only can you have copper
granules with high purity, the plastics can
also be recycled, having high economic benefits. Its copper output is 5-6T/D.
Features of 800 Cable Recycling Plant
1. Large handling capacity, suitable for large scale production.
2. Manual feeding material for one time, multiple machines combined for automatic
3. Adopting PLC to control the whole system, having stable performance.
4.The purity of copper is up to 99.99%.
5. The plant adopts air and vibration separation, no water pollution.
6. The voltage can be customized according to your requirements.
Working Process of 800 Cable Recycling Equipment
1. The first crusher of the recycling plant crushes the wires/cables into 10-20mm length.聽
2. By conveyor, crushed wires/cables are conveyed to the second crusher, which crush
them again into 3-5mm length plastic pieces and copper granules.
3. The mixture is sent to the vibration system. By airflow and vibration, plastic pieces are
separated from copper granules thoroughly.
4. Copper granules and plastic pieces come out of the granulator from different outlet.
Dust is collected by dust collector through air duct.
No matter when we find you inquiry, we will give you reply in time. Welcome to visit our