Introduction of Water Filling Machine (2) .pdf
Original filename: Introduction of Water Filling Machine (2).pdf
This PDF 1.5 document has been generated by Microsoft® Word 2013, and has been sent on pdf-archive.com on 18/12/2015 at 04:13, from IP address 124.90.x.x.
The current document download page has been viewed 251 times.
File size: 427 KB (3 pages).
Privacy: public file
Download original PDF file
Introduction of Water Filling Machine (2)
Use, maintenance and installation
Because this water filling machine is an automatic machine, the bottle cap,
bottle size are required be same.
You must rotate the handle before you start the water filling machine to
test whether there is anything abnormal rotation. After confirming its safe, you can
When adjust the water filling machine,
the tools must be used
appropriately. Don’t use excessive tools or excessive force to dismantle parts. Those
will damage the water filling machine.
After adjusting, you must screw the loosen screw. Before starting water
filling machine, turning the machine by shaking the handle and look its action
whether in accordance with requirements.
The water filling machine must be kept clean. The oil, liquid, glass debris
on machine will wear the machine.
(1). In the production process, the machine should be cleaned timely
(2). The various parts of the machine surface shall be cleaned before
succession once, and applying cleaning lubricating oil to all the activities
(3). Thrown scrub once a week, especially in the part that were not easy to
wipe clean in common use or with compressed air blowing off.
Disinfection and flushing
Unscrew the upper and lower set screws and remove liquid injectio n
system as a whole sterilization, disinfection cleaning or removing respectively.
The inlet tube in the cleaning solution to clean boot.
There may be error in the 500 ml model in the actual filling, before the
formal filling, measuring cylinder volume so far.
Type filling machine with the needle, 10 with a standard 5 ml or 10 ml
syringe, 20 with 20 ml glass type filling machine, the type 100 with 100 ml glass
After the machine out of the box, first, check whether random technica l
information is available and the machine is damaged in transit in order to promptly
The incoming components and the material components should be
installed and adjusted according to the shape in specification.
New lubricating oil should wipe on all lubricating.
Turning the machine by shaking the handle and checking whether the
machine is running in the right direction (in the face of motor spindle for
counterclockwise), the water filling machine must stay on the ground.
The working principle and performance of water filling machine
Working principle: the water filling machine is semi-automatic piston type
filling machine. It extract and hit by cylinder and control material flow by a check
valve. Also it control cylinder stroke by the magnetic reed switch in order to
adjusting the filling quality.
Performance: the water filling machine offered by Goldsan introduces
foreign advanced water filling machine technology and has carried on further
reform and innovation. It is best choice for your company with more simple and
reasonable structure, high precision, easy operating.