Whirlston radiator recycling machines .pdf
Original filename: Whirlston radiator recycling machines.pdf
This PDF 1.7 document has been generated by WPS Office / , and has been sent on pdf-archive.com on 17/02/2016 at 08:55, from IP address 104.238.x.x.
The current document download page has been viewed 436 times.
File size: 262 KB (3 pages).
Privacy: public file
Download original PDF file
Whirlston Radiator Recycling Machines for
Whirlston likes to make your recycling convenient and efficient, returning you much
more. If your scale is not so big, a single radiator recycling machine is OK; if your
have large quantity of radiator scrap, we can customize a whole plant for you.
Radiator Recycling Machine
The operation of this machine is very simple. Cut the clean radiator neatly into 30-40
cm wide, and then put into the material
inlet, within seconds copper pipes and
separately. Copper pipe will keep
complete, while aluminium fin will be a
little broken for one-row radiator and
keep complete for two-row radiator.
Features of Radiator Separating Machine
1. Compact structure, taking up small area.
2. Humanized design, easy to operate.
3. High efficiency, separation within seconds.
4. Labor saving, use automatic recycling
instead of labor working.
5. No damage to copper pipes, no copper
loss, practical and economical.
6. Low investment, high profit.
7. The voltage can be customized as per your requirements.
Application of Radiator Recycling Machine
1. The machine is specially used
for processing aluminium copper
2. The machine is suitable for
separating one-row and two-row
radiators. For radiators of more
than 2 layers, please use a band
saw to cut them into one layer or
3. Center distance of two copper
pipes in radiators shall be 19mm or 21mm or 25mm. We could also customize as per the
Radiator Recycling Plant
Radiator recycling plant is specially designed for crushing scrap air conditioning radiator,
and then separate copper, aluminum and iron for recycling. Having high automation and
high efficiency, this radiator crushing machine is quite suitable for recycling large quantity
of scrap radiators.
Advantages of Radiator Recycling Plant
* Adopt electric control cabinet to control the whole system.
* High efficiency, saving labour and cost.
* The separating rate can reach 99.8%.
* Adopt cyclone dust collector, no pollution to the environment.
* Low noise, the noise is not more than 85db.
* The voltage can be customized as per your requirements.
1. Belt Conveyor: to connect the whole line and convey scrap radiators to crusher.
2. First Crusher (Double-shaft Crusher): to cut radiators into 10-20mm length, then the
crushed material is transported by the conveyor belt to the second crusher.
3. Belt Conveyor: to transfer the first crushed materials for the second crushing.
4. Second Crusher: After transported to this crusher, the 10-20mm material is shredded
by this crusher to smaller pieces.
5. Magnetic Separator: to separate iron from the crushed mixture, so that copper and
aluminum can be separated easily.
6. Vibrating Separator: to separate copper pieces from aluminum pieces based on their
different specific gravity.
Contact email: firstname.lastname@example.org