PDF Archive

Easily share your PDF documents with your contacts, on the Web and Social Networks.

Share a file Manage my documents Convert Recover PDF Search Help Contact

southpointsecurity .pdf

Original filename: southpointsecurity.pdf
Author: Satyajit

This PDF 1.5 document has been generated by Microsoft® Office Word 2007, and has been sent on pdf-archive.com on 26/02/2016 at 11:41, from IP address 45.64.x.x. The current document download page has been viewed 230 times.
File size: 302 KB (2 pages).
Privacy: public file

Download original PDF file

Document preview

Home Alarm Security System - 4 Devices To Appear
For To Reduce Your Installation Cost
In case your property is prewired for any house alarm method, you might choose to do an
inventory of the devices installed.
This may make your meeting together with your safety consultant more productive. During the
check, you need to discover what devices are installed and how quite a few you will find. You will
be looking for your keypad, alarm panel, door and window contacts, motion detectors and smoke

Seeking for the keypad is pretty straightforward. Typically your keypad is positioned close to a
single with the entrances. Look at the hall way major towards the garage door and about the front
door. The keypad may have numbers on it, equivalent towards the similar layout as your phone.
Look for words like, arm, off, away, keep, police, fire and medical.
You also want to see if there's a flip cover. look inside the flip cover, there might be info in regards
to the method on it. Create down all the data you obtain on and about the keypad. This can help
the security consultant figure out what variety of program it is actually.
Alarm panel
Your alarm panel would be the heart of the alarm system. All of the wires from the devices
installed will run back towards the alarm panel. Most alarm panels in prewired homes are
installed with other low voltage panels, which include your cable and phone boxes.
They are typically positioned in the master bedroom closet. Other locations to appear are closets
within the hallway and in the garage. This panel is distinctive than your electrical panel. It doesn't
have circuit breakers inside. What you can see inside is a circuit board with wires running to it.
Door and window contacts
When your home was prewired, the contractor added contacts and magnets to the doors and a
few windows. You will find your prewired contacts and magnets inside the door and window

It is best to also look in the doors and windows themselves. You ought to see a round stud on the
frame plus the door or window. They are your magnets and contacts. At a minimum, all your doors
ought to have contacts on them.
Motion detectors and smoke detectors

When the dwelling has a comprehensive method installed, you'll want to have at least 1 motion
detector. The motion detector is usually positioned within a hallway connecting your bedrooms for
the living room region.
It can be rectangular or oval shaped and white in color. It's going to possess a smaller square
opaque location at the bottom. If it truly is powered, you should see a red light any time you walk
in path of your infrared beams.
Smoke detectors are generally installed with prewired residence alarm safety systems. These
smoke detectors are different from your regular smoke detectors. They may be wired into your
alarm method. The typical smoke detectors usually are not wired in to the technique.
To discover in case your smoke detectors are wired in, open them up to see if you will discover
wires connected to them. If there are actually wires, then it's wired. You'll want to also have the
consultant of technician verify the wiring inside the panel to produce certain the wiring comes
back for the panel.
Get to know extra about alarm security systems MC Allen TX

southpointsecurity.pdf - page 1/2
southpointsecurity.pdf - page 2/2

Related documents

enforcer eu infinite
wireless security systems
how to choose a best burglar alarm for your home
2050 alarmsense installation manual

Related keywords