maintenance fixes to keep a1393 .pdf
Original filename: maintenance fixes to keep a1393.pdf
This PDF 1.4 document has been generated by / iTextSharp™ 5.4.1 ©2000-2012 1T3XT BVBA (AGPL-version), and has been sent on pdf-archive.com on 01/03/2016 at 08:12, from IP address 207.195.x.x.
The current document download page has been viewed 305 times.
File size: 4 KB (2 pages).
Privacy: public file
Download original PDF file
maintenance fixes to keep a
The winter in itself is already a difficult one to deal with. But having to deal with a heater that is not
working as it should or one that just stopped working entirely can truly be a concern to any
homeowner. This is why it is essential that every property owner ought to make the effort to clean
and keep their heating systems even when not in use to guarantee that the heater is at its finest
working condition when the winter hits. As the cliché goes, an ounce of prevention deserves a
pound of treatment. By investing a couple of hours of your time, a few dollars, and simply a few
basic tools, you make certain to look forward to a stress-free cold month. That being said, here
are some step by step maintenance tasks that you can do for your furnace.
1. Start by turning your heater power off and continue by removing the combustion door. If you
are unsure where the combustion door is located, describe your handbook. Merely raise the door
up and pull it out.
2. Check your burner flames. If your heating system has a burner cover, remove it or unscrew it.
Trigger the burner by turning the power back on and turning up the thermostat. The color of your
furnace's burner flames can offer you indications of the status of your system. Usually, the flames
need to be blue and relatively even. If the burner flames are yellow, this informs you that your
burners are unclean and need to be cleaned and adjusted. When this occurs, it is best to contact
the pro to do the task.
3. After checking the color of the flames, turn the power off and inspect the burners and the
blower cavities for any sign of dust and soot. You can use vacuum to get rid of the dust you see
around the burners and the blower compartment. Take note that if you see soot, this is an
indicator that there is poor combustion in your system.
4. The next step is to obtain the blowers cleaned. Carefully take away the blower from its location
by loosening the bolts that keep it in place. If you have a control board right in front of the blower,
unscrew it from its location and let it hang while you get the blower out. Make use of your vacuum
and a little brush and thoroughly clean the blower blades making sure not to detach any electrical
wiring or connections. Carefully get everything back to their places after.
5. Modification filter. Now you are most likely aware of the value of altering and cleaning your
furnace filters every one to 3 months. Filters are there primarily to protect the furnace and all of
the other components. You can opt for a fiber glass filter which will appropriately offer the defense
that your heater requires. You can also set up a more costly and high-efficiency filter, just refer to
your manual for the recommended filters offered for your heater. Having clean filters ensure that
your heater is effective and put less stress on the blower motor. Obviously, when you have a
heater that is working correctly, you also get your share of quality indoor air.
6. Dust off the pilot. The furnace pilot can build up dust and cause and trigger the thermocouple
provide unreliable pilot reading, like the pilot isn't lit when it in fact is. You can avoid this by
dusting off the pilot and keeping it clean. This might not apply to some more recent heating
systems that make use of igniters instead of pilots.
7. Wipe the flame sensing unit. When you have a flame sensing unit that is covered in dust and
other residue, it stops your furnace from shooting up. Clean the flame sensors utilizing a great
fabric and wipe off any residue.
8. Dust off the igniter. The more modern-day furnaces today utilize igniters instead of pilots.
Remember to not touch the igniter. Take a straw and blow off the dust using the straw.
9. Look for any cracks. The heating system's drive belt likewise needs to be looked for any sign of
damage. If you need to change a new belt, a new one expenses about $5.
10. Oil bearings as required. For those who own the older types of furnaces where there are a
number of motor bearings and a number of shaft bearings, it is necessary to obtain these
bearings lubed each year. Clean the outdoors part and wipe off any residue. Remember-- do not
11. Seal leaks. Leaking ducts are a huge waste of cash and energy. Watch on your ducts making
sure you do not have any leaks. If you do, you can use an unique metal tape or a high
temperature silicone to get the leakages covered.
These simple actions need to help you save money from unneeded repairs, improve your heating
system's effectiveness, and keep your furnace in leading shape especially throughout the winter
when you require it most. http://furnacetips.jimdo.com/