Mud Pump the Classification and Function .pdf
Original filename: Mud Pump-the Classification and Function.pdf
This PDF 1.5 document has been generated by Microsoft® Word 2013, and has been sent on pdf-archive.com on 04/03/2016 at 03:32, from IP address 173.82.x.x.
The current document download page has been viewed 438 times.
File size: 193 KB (2 pages).
Privacy: public file
Download original PDF file
Mud Pump-the Classification and Function
It has two main performance parameters namely displacement and pressure.
Displacement will be calculated from several liters per minute. It is related to
borehole diameter and fluid speed. It required that the back flushing fluid velocity
able to run away drill cuttings, cutting down rock powder from the bottom of the hole
timely and set them on ground reliably. When the geological core drilling, the general
rate of return from 0.4 to 1 m / min or so. Pressure of the pump depends on the depth
of the borehole, the fluid resistance through the channel and the fluid nature of the
transmission, etc. Deeper drilling, the larger the pipeline resistance, the higher the
With the change of the depth of the hole diameter, it is required that
displacement of the pump can be adjusted at any time. Transmission mechanism or
hydraulic motor provided in the pump can adjust its speed to achieve the purpose of
+86 182 3419 6903
changing the displacement. In order to accurately grasp the change in pump pressure
and displacement, the mud pump pressure gauges and flow meters to be installed to
make drilling person to understand the functioning of the pump. At same time, drilling
person determine whether the normal status changes bore hole to prevent the
occurrence of accidents according to pressure changes.
Mud pump can be divided into double-acting and single-acting. Single-acting
mud pump complete only one suction drainage action in a piston reciprocating cycle.
However, the double-acting one can complete two suction drainage action. According
to number of cylinders, the mud pump can be segmented into single-cylinder twin
Sewage mud pump is single stage single suction vertical centrifugal pump. It
consists of volute, impeller, shaft, pump casing, support tube, motor base, electric
motor. Volute, pump housing, motor housing, impeller nut is produced by cast iron.
They possess good corrosion resistance and their machining processes is easy. The
mud pump seat equipped with four oil seal and sleeve can prevent shaft wear and
prolong the service life of the shaft.
+86 182 3419 6903