Toy Hauler Screen Installation pdf .pdf
Original filename: Toy_Hauler_Screen_Installation pdf.pdf
Author: McIntyre, Stephanie
This PDF 1.6 document has been generated by MicrosoftÂ® Word 2013, and has been sent on pdf-archive.com on 18/03/2016 at 11:43, from IP address 68.51.x.x.
The current document download page has been viewed 417 times.
File size: 140 KB (1 page).
Privacy: public file
Download original PDF file
Toy_Hauler_Screen_Installation pdf.pdf (PDF, 140 KB)
Share on social networks
Link to this file download page
SCREEN INSTALLATION - NO TOOLS NECESSARY
Screens were designed to mount on the outside frame of your door
Step 1 – Make sure the area you are mounting your screen to is free from peeling paint, protruding nails,
or loose wood. You may want to clean the area or sand lightly.
Step 2 – Unroll screen and hold it up to where you would like to mount it, about 1 inch above your door.
You may want to pencil a line across the top of your door and down each side so you can have a guide for
attaching the hook fastener. Make sure your screen will not interfere with your door opening and closing.
Step 3 – Put screen aside for now and take self adhesive fastener tape and unroll about 1 foot at a time.
Pull back transparent tape and press hook fastener to your mounting surface about 1 foot at a time. You
may want to start at the top of your mounting surface first then follow along each side.
Step 4 – It is a good idea to let the self-adhesive fastener cure for 24 hours to achieve maximum
adhesion. You may want to staple or nail through the self –adhesive fastener to increase the holding
strength. (use nails or staples that will not rust)
Step 5 – Unroll screen and start at either top corner pressing the screen on to the hook fastener you have
mounted and then continue down each side.
A. Each screen has a pouch sewn at the bottom that you may insert ½ inch conduit or plastic pipe to add
weight to the bottom of the screen, to minimize movement and keep the screen close to your floor.
B. Cleaning screen: Use mild soap and water. Make sure screen is completely dry before storing. Do not
store screen if it is damp.
C. Screen can be removed very easily. You will want to leave the self-adhesive material attached to you
Link to this page
Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..
Use the short link to share your document on Twitter or by text message (SMS)
Copy the following HTML code to share your document on a Website or Blog