2 burner gas stove .pdf
Original filename: 2 burner gas stove.pdf
This PDF 1.5 document has been generated by Microsoft® Office Word 2007, and has been sent on pdf-archive.com on 27/05/2016 at 08:00, from IP address 27.58.x.x.
The current document download page has been viewed 263 times.
File size: 190 KB (1 page).
Privacy: public file
Download original PDF file
2 burner gas stove
The flame from it is not just clear blue and if you have an LPG gas stove burner and is sputtering, then
you may have an issue with the burner. Maintenance is essential because a weak fire like this is a danger
to the individual using the cooker, and it could cause an explosion. Maintaining it will also ensure that
you simply keep your energy prices low because it avoids wastage.
Whether you're using LPG or industrial gas burners, getting rid of spillages is crucial. If spillages will play
a part in reducing the efficiency of the range the stove you are using can also determine. There are two
kinds of stoves used at home. The cook that is sealed and the open top range.
Open and Sealed Cookers
The first one means that the cook top is open and therefore the spillages could find their way to the
burner. Open stoves are more efficient when it comes to cooking, but need a low of care. The sealed
design compromises the efficacy of the stove while making it last longer without maintenance.
If you take a look at it from a different angle, the range that is sealed may be more efficient than the
open one in the long run, since its efficacy don't appreciably change. Industrial burners should be
maintained regularly, because they're smaller in diameter in order to focus the fire better
Cleaning the Stove
Cleaning the LPG gas stove burner on a regular basis is important to remove the grease that prevent it
from working properly and may accumulate and clog the system. Cleaning can be done by removing the
cook top of the range.
Remove the burner and clean it with hot water. Find the fire and flash tube openings, then using a thin
wire; remove any grime that may be stuck in there. You may reassemble the whole unit and analyze it,
by checking the quality of the fire.
Significance of Materials Used
Both stove and industrial gas burners should be made of substances that can withstand rust and
corrosion. This is even more important for industrial gases like acetylene which may corrode it. For
applications that are heavy, it is important to contemplate high end materials such as cast brass and
stainless steel. Other materials such as cast iron will start to rust after sometime.