BlueOptics BO35J13610DC 10GBASE LR SFP+ Receiver 1310nm (PDF)




File information


Author: Chris

This PDF 1.5 document has been generated by Microsoft® Word 2010, and has been sent on pdf-archive.com on 01/06/2016 at 11:39, from IP address 91.10.x.x. The current document download page has been viewed 338 times.
File size: 632.72 KB (7 pages).
Privacy: public file
















File preview


BO35J13610DC
SFP+ 10G 1310nm 10KM
RoHS Compliant Optical Receiver

SFP+ 10G 1310nm Single mode Optical Receiver

Features

Description
The BlueOptics© BO35J13610DC SFP+ receiver is a
high performance, cost effective module supporting a
datarate up to 10Gbps with 10 Kilometer link length
on single mode fiber.



10Gb/s serial optical interface compliant to
802.3ae 10GBASE-LR



PIN photo-detector

BlueOptics© receivers are 100% compliant with SFP+
Multi-Source Agreement (MSA).



Hot-pluggable SFP+ footprint compliant to
SFF-8431

All BlueOptics© SFP+ receivers are always equipped
with digital diagnostic function compliant to MSA SFF8472.



Duplex LC/UPC
interface



2-wire interface for management



Metal enclosure, for lower EMI



RoHS compliant and lead-free



Single +3.3V power supply



Compliant with SFF-8472



Case operating temperature

Using digital diagnostic, BlueOptics© SFP+ receivers
provide the following real time information:
-

Supply voltage
Laser received input power
Temperature

The receiver consists of four sections: A PIN
photodiode, a trans-impedance preamplifier (TIA),
the LD Driver and the digital diagnostic function.

-

Applications


10GBase-LR/LW



Ethernet / Fiber Channel



Switch to Switch Interface



Router/Server Interface



Other optical links

-1-

type

pluggable

Commercial: 0°C to +70°C
Extended: -10°C to +80°C
Industrial: -40°C to +85°C

optical

BO35J13610DC
SFP+ 10G 1310nm 10KM
RoHS Compliant Optical Receiver

Warnings

Order Information

Handling Precautions: This device is susceptible to
damage as a result of electrostatic discharge (ESD). A
static free environment is highly recommended.
Laser Safety: Even small radiation emitted by laser
devices can be dangerous to human eyes and lead to
permanent eye injuries. Be sure to avoid eye contact
with direct or indirect radiation.

Part No.

Temp.

BO35J13610DC

DDM

0°C to +70°C

BO35J13610DCEX

-10°C to +80°C

BO35J13610DCIN

-40°C to +80°C

Regulatory Compliance
Feature
Electrostatic

Warranty

Standard

Co.

- IEC/EN 61000-4- 2

Discharge (ESD)

Every BlueOptics© receiver comes with a 5 year
replacement warranty and lifetime support.
For a warranty inquiry, please contact your CBO sales
representative.
This warranty only covers the first user of the
equipment.

Important Notice
Performance figures, data and any illustrative
material provided in this data sheet are typical and
must be specifically confirmed in writing by CBO
before they become applicable to any particular order
or contract. In accordance with the CBO policy of
continuous improvement specifications may change
without notice.
The publication of information in this data sheet does
not imply freedom from patent or other protective
rights of CBO or others.
Further details are available from any CBO sales
representative.

Installation
Before installation attach an ESD-preventive wrist to
ensure not to damage the receiver or hardware.
BlueOptics© BO35J13610DC can be installed in any
Small Form Factor Pluggable+ (SFP+) port. You can
install the BO35J13610DC regardless if the system is
powered on or off, because it is hot-swappable.
Insert the receiver into the SFP port and remove
the dust cap.

You can now connect your cable.

-2-

Electromagnetic

- FCC Part 15 Class B EN 55022

Interference (EMI)

- Class B (CISPR 22A)

Laser Eye Safety

- FDA 21CFR 1040.10, 1040.11
- IEC/EN 60825-1, 2

Component
Recognition

- IEC/EN 60950, UL

RoHS

- 2002/95/EC

EMC

- EN61000-3

Class 1

BO35J13610DC
SFP+ 10G 1310nm 10KM
RoHS Compliant Optical Receiver

1. Absolute Maximum Ratings
Parameter
Storage Temperature
Storage Ambient Humidity

Symbol
Ts
HA

Min.
-40
5

Typ.

Max.
85
95

Unit
ºC
%

2. Recommended Operating Conditions
Parameter
Case Operating Temperature

Symbol

Min.
0
-10
-40
5

Tcase

Ambient Humidity
Transmission Distance
Coupled Fiber

HA

Typ.

Max.
70
80
85
70
10

Unit
ºC

Note
BO35J13610DC
BO35J13610DCEX
BO35J13610DCIN

%
KM

Single mode fiber

9/125µm SMF

3. Electrical Interface Characteristics
Parameter
Power Supply Voltage
Signal Input Voltage
Receiver
Differential data output swing
Data output rise time
Data output fall time
LOS Fault
LOS Normal
Power Supply Rejection

Symbol
Vcc
Icc

Min.
3.14

Vout,pp
tr
tf
VLOS
fault
VLOS
norm
PSR

300
28
28
Vcc-1.3
Vee
100

Typ.
3.3

Max.
3.46
290

Unit
V
mA

Note

850

VccHOST

mV
Ps
Ps
V

3
4
4
5

Vee+0.8

V
mVpp

5
6

Notes:
1. Internally AC coupled.
2. Or open circuit.
3. Into 100Ω differential termination.
4. 20-80%
5. LOS is an open collector output. Should be pulled up with 4.7KΩ on the host board.
6. All receiver specifications are compliant with a power supply sinusoidal modulation of 20 Hz to 1.5 MHz
up to specified value through the power supply filtering network shown on page 23 of the Small Form factor Pluggable (SFP) Receiver Multi Source Agreement (MSA), September 14, 2000.

-3-

BO35J13610DC
SFP+ 10G 1310nm 10KM
RoHS Compliant Optical Receiver

4. Receiver Specifications - Optical
Parameter
Input Optical Wavelength
Receiver Sensitivity
LOS Assert
LOS De-assert
LOS Hysteresis

1.

Symbol

λIN
PIN
PA
PD
PA-PD

Min.
1260

Typ.

Max.
1600
-15

-30
-17
0.5

1.0

Unit
nm
dBM
dBm
dBm
dB

Note
1

Notes:
-12
31
Measured with Light source 1310nm, ER=3.5dB; BER =<10 @PRBS=2 -1 non-return-to-zero.

5. SFP+ to Host Connector Pin Out
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Symbol
VEET
TFAULT
TDIS
SDA
SCL
MOD-ABS
RS0
LOS
RS1
VEER
VEER
RDRD+
VEER
VCCR
VCCT
VEET
TD+
TDVEET

Name / Description
Transmitter Ground (Common with Receiver Ground)
Transmitter Fault indication
Transmitter Disable
2-wire Serial Interface Data Line
2-wire Serial Interface Clock Line
Module Absent. Grounded within the module
Rate Select 0
Loss of Signal indication
No connection required
Receiver Ground (Common with Transmitter Ground)
Receiver Ground (Common with Transmitter Ground)
Inv. Received Data Out
Received Data Out
Receiver Ground (Common with Transmitter Ground)
Receiver Power Supply
Transmitter Power
Transmitter Ground (Common with Receiver Ground)
Transmit Data In
Inv. Transmit Data In
Transmitter Ground (Common with Receiver Ground)

Note
1
2
3
4
4
4
5
6
1
1
1

1

1

1

Notes:
1.
2.
3.
4.

Circuit ground is isolated from chassis ground.
Needs to be pulled up with 4.7k – 10kΩ on host board to a voltage from 2.0V to Vcc + 0.3V.
Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.
Mod_ABS is connected to VeeT or VeeR in the SFP+ module. The host may pull this contact up to
Vcc_Host with a resistor from 4.7 kΩ up to 10 kΩ.
5. RS1 are module inputs and are pulled low to VeeT with > 30 kΩ resistors in the module.
6. This is an open collector output, which should only be pulled with a resistor of 4.7k - 10kΩ. Pull up
voltage between 2.0V and 3.6V. Logic 1 indicates loss of signal; logic 0 indicates normal operation. The
output will be pulled to less than 0.8V.

-4-

BO35J13610DC
SFP+ 10G 1310nm 10KM
RoHS Compliant Optical Receiver

Pinout of Connector Block on Host Board

6. EEPROM Information
The SFP MSA defines a 256-byte memory map in EEPROM describing the receivers capabilities, standard
interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at the 8-bit
address 1010000X (A0h).
Data
Address
0
1
2
3-10
11
12
13
14
15
16
17
18
29

Field Size
(Bytes)
1
1
1
8
1
1
1
1
1
1
1
1

Name of Field

Contents (Hex)

Description

Identifier
Ext. Identifier
Connector
Receiver
Encoding
BR, Nominal
Reserved
Length (9μm) km
Length (9μm) 100m
Length (50μm) 10m
Length(62.5μm)10m
Length (Copper)

XX
XX
XX
XX XX XX XX XX XX XX XX
XX
XX
00
XX
XX
XX
XX
XX
00
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
00
XX XX XX
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
XX XX XX XX
XX XX
00
XX

Formfactor

1
16

Reserved

1
3
16

Reserved
Vendor OUI

56-59
60-61
62
63

4
2
1
1

Vendor rev
Wavelength
Reserved

64-65
66
67

2
1
1

Options
BR, max
BR, min

30-35
36
37-39
40-55

Vendor name

Vendor PN

CC BASE

XX XX
XX
XX

-5-

Transmittter Code
Receiver Speed
Max. link length in KM
Max. link length in M
Max. link length in M
Max. link length in M
Max. link length in M
Vendor name - OEM

Product Number depending on Part
Vendor revision
Receiver Wavelength
Checksum of bytes 062

BO35J13610DC
SFP+ 10G 1310nm 10KM
RoHS Compliant Optical Receiver

68-83

16

84-91
92
93
94
95

8
1
1
1
1

96-255

160

XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX 20 20
XX
XX
XX
XX

Vendor SN
Vendor date code
Diagnostic type
Enhanced option
SFF-8472
CC_EXT

Part serial number
Year, Month, Day
Diagnostics
Diagnostics
Diagnostics
Checksum of bytes 6494

Vendor Specific

7. Digital Diagnostics / Digital Optical Monitoring
The receiver provides serial ID memory contents and diagnostic information about the present
operating conditions by the 2-wire serial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration are all implemented,
including received power monitoring, transmitted power monitoring, bias current monitoring, supply
voltage monitoring and temperature monitoring.

8. Recommended Interface Circuit

-6-

BO35J13610DC
SFP+ 10G 1310nm 10KM
RoHS Compliant Optical Receiver

9. Mechanical Specifications (Unit: mm)

Contact Information
CBO GmbH
Friedhofstraße 25
45478 Mülheim an der Ruhr
Germany
Tel.:
Fax.:
eMail:
web:

0049 – 208 – 777 247 - 0
0049 – 208 – 777 247 - 99
info@cbo-it.de
www.cbo-it.de

-7-






Download BlueOptics BO35J13610DC 10GBASE-LR SFP+ Receiver 1310nm



BlueOptics_BO35J13610DC_10GBASE-LR_SFP+_Receiver_1310nm.pdf (PDF, 632.72 KB)


Download PDF







Share this file on social networks



     





Link to this page



Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..




Short link

Use the short link to share your document on Twitter or by text message (SMS)




HTML Code

Copy the following HTML code to share your document on a Website or Blog




QR Code to this page


QR Code link to PDF file BlueOptics_BO35J13610DC_10GBASE-LR_SFP+_Receiver_1310nm.pdf






This file has been shared publicly by a user of PDF Archive.
Document ID: 0000378965.
Report illicit content