Enerpac Bridge Maintenance 2016 (PDF)




File information


This PDF 1.5 document has been generated by Adobe InDesign CS6 (Macintosh) / Adobe PDF Library 10.0.1, and has been sent on pdf-archive.com on 30/06/2016 at 18:23, from IP address 184.105.x.x. The current document download page has been viewed 496 times.
File size: 5.34 MB (2 pages).
Privacy: public file










File preview


TOOLS FOR BRIDGE MAINTENANCE
ANCHOR BOLT, ROD and CABLE TENSIONING and TESTING

Maintaining and repairing concrete and steel
bridges requires powerful tools. Enerpac hydraulic
tools

are used in a variety of tasks to repair a

bridge to confirm and maintain the integrity of

TORQUING and TIGHTENING
Testing and tensioning of bolts, rods
and cables requires unique tools.
Enerpac offers hollow cylinders that
are designed to pull on these objects
to create tension.

these structures. Our broad portfolio of solutions
will enable you to complete your task regardless of
the bridge design.

The RRH / RCH-Series Cylinders
(up to 150 ton) are hollow cylinders
capable of both pushing and pulling
objects, and the RACH-Series
Cylinders (up to 150 ton) offer this
same capability in a lightweight
design. This is just one of the Enerpac
cylinder series that utilize aluminum
and composite materials to
maximize portability.

Bolts are typically loosened and tightened
when replacing steel chords and beams, and
Enerpac offers multiple solutions for controlled
tightening to the required specifications.

LIFTING and JACKING
Enerpac offers several solutions
to lift bridge decks for many
maintenance activities, such
as bearing replacement or
repositioning. The correct solution
is dependent on the bridge design
and location.

The PTW-Series pneumatic torque
wrenches (up to 6,000 ft-lbs) deliver fast
and accurate torque, while the S-Series
hydraulic torque wrenches (up to 25,000 ftlbs) provide the greatest torque and precision.
Lastly, NC-Series hydraulic nut cutters can
be used to safely remove any corroded nuts.

SIMPLE & SOPHISTICATED
CONTROLS
The RSM/RCS-Series cylinders (up
to 100 ton) have the lowest profile
and can lift bridges shorter distances
required for bearing replacement,
while the CLP/CLL-Series cylinders
(up to 1000 ton) provide either low or
tall profiles with the additional benefit
of a mechanical locking feature that,
when engaged, will keep the bridge
deck in place in the event of a loss in
hydraulic pressure.

BLS-Series cylinders (up to 200
ton) have the capability to cover
the greatest distances with a
longer stroke and a wide base for
stage lifting. After the cylinder
extends, blocks are placed
beneath the base to support the
bridge while the cylinder retracts
for the next stage lift.

w w w.e ne rp a c .c om

PILE TESTING and DE-PROPPING
Pile testing can require tremendous
forces, but regardless of the force
required Enerpac has a very broad
offering of cylinders.

The CLSG/CLRG-Series cylinders
(up to 1000 ton) are our highest
capacity tools and are commonly
used to apply great force to a
single pile. These cylinders are also
common in de-propping concrete
and steel bridges to and from
temporary supports.

Many of these applications require the
synchronization of multiple hydraulic
cylinders. Enerpac provides several
solutions to control and synchronize
these tools. These solutions range from
the simple AM41 manifold and GA45GC
gauge assembly to the precise, integrated
flow controls in the SFP-Series split flow
pump or EVO-Series pump.

Tools for Bridge Maintenance

Tools for Bridge Maintenance

All hydraulic tools require a pump to generate pressure.
Enerpac hydraulic pumps range from the compact and
portable to the powerful and precise. Our offering provides a
range of sophistication to match the requirements of your job.

XC-SERIES CORDLESS PUMPS / PU-SERIES ELECTRIC PUMPS
Pump Power

Speed

Flow Control

EXPERIENCE and
EXPERTISE

Enerpac hydraulic tools have
been used in bridge maintenance,
replacement, and construction for

Electric

Manual

decades, and our team has years of
experience to ensure you have the right
tools and knowledge to complete your
job efficiently and safely.
Over time, Enerpac has also developed

Z-CLASS PUMPS / 8000 SERIES PUMPS

powerful solutions for the most

Pump Power

Speed

Flow Control

complex projects. Thses systems have
enabled the lifting, positioning and
transportation of the world's largest

Electric
Manual

or

structures. Whether your project is
simple or complex, contact Enerpac
for a solution to fit your needs.

Gasoline

SFP-SERIES PUMPS
Pump Power

Speed

Flow Control

Simple
Synchronized
Extension

Electric

EVO-SERIES PUMPS
Pump Power

Electric

Speed

Flow Control
Precise
Synchronized
Extension and
Retraction

Your Enerpac Distributor:
e-mail: info@enerpac.com
Internet: www.enerpac.com
703-030132116_EN-US ©2016 Enerpac

702_030132116_EN-US © 2016 Enerpac - Subject to change without notice.

PERFORMANCE
When and
Where You
Need It






Download Enerpac Bridge Maintenance 2016



Enerpac Bridge Maintenance 2016.pdf (PDF, 5.34 MB)


Download PDF







Share this file on social networks



     





Link to this page



Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..




Short link

Use the short link to share your document on Twitter or by text message (SMS)




HTML Code

Copy the following HTML code to share your document on a Website or Blog




QR Code to this page


QR Code link to PDF file Enerpac Bridge Maintenance 2016.pdf






This file has been shared publicly by a user of PDF Archive.
Document ID: 0000395941.
Report illicit content