Voltage Stabilizer A Boon to Deal with Power Outages .pdf
Original filename: Voltage Stabilizer - A Boon to Deal with Power Outages.pdf
This PDF 1.3 document has been generated by http://www.convertapi.com, and has been sent on pdf-archive.com on 01/07/2016 at 12:10, from IP address 110.227.x.x.
The current document download page has been viewed 339 times.
File size: 380 KB (3 pages).
Privacy: public file
Download original PDF file
A Boon to Deal with Power Outages
Stabilizer is a device which stabilizes electricity at the time of voltage fluctuations. It is also
known as voltage regulators as it regulates the electricity. Each stabilizer is made of specific
voltage which must be controlled. Though it can regulate both DC and AC supply, it depends
on design. The DC voltage stabilizer uses a shunt voltage; on the other hand, the AC voltage
stabilizer utilizes an auto transformer.
The industrial voltage stabilizers, which are utilized in different electromechanical
industries, can also be used at home for stabilizing high current voltage. This particular
stabilizer not only provides the needed voltage to other internal equipment, but also
regulates the increased voltage. A constant electricity flow is required in the industries to
provide the equipment a constant electricity flow. Sudden voltage drops and power surges
can cause serious harm to your devices and other delicate appliances as well.
The function of voltage stabilizers:
The function of voltage stabilizers is storing power and providing constant power from its
reserve to the attached devices. The digital stabilizers are also included into the UPS which
is a power backup system for your PC enabling function for a limited time period. UPS
allows appropriate time for your PC or other appliances’ shut down for avoiding loss of data
and any other problems, when UPS is connected to your system.
The working method of voltage stabilizers differs from each other yet the fundamentals
remain similar. Voltage stabilizers are plugged into the outlet which charges the battery unit
series in the stabilizers. Even if the power fluctuates from the outlet, these capacitors
maintain their charge. Every stabilizer plugged into the appliance, will receive its power
from the battery or capacitor and not from the output source. A stabilizer is designed in a
method that the stabilizer and the electricity source are on different circuits. The power
from the outlet continues to get recharged when the machine drains power from the
capacitor. The stabilizer’s circuit is lower than the real power input and has a resistance;
thus you can see that the appliances operate little slower while connected to the digital
How stabilizers deals with voltage issues:
With an amplifier, this lower voltage issue can be dealt. The voltage input is increased and
the batteries and capacitors are charged by this amplifier. This makes sure that the
stabilizers don’t suffer from the power drain while the power cuts. Even, this enhances the
stabilizers and electronic appliances’ performances, yet the amplifiers likewise increase the
overall unit size and expense.
It is imperative to understand the connected load while buying an industrial digital
stabilizer. The total power consumption provides the stabilizer’s load in watts. Many
stabilizers give out the power in kilovolt ampere or volt ampere. To get a complete 3-phase
set-up and a 3-phase motor, you can use 3-phase voltage stabilizers only.
You can get more information regarding digital stabilizers on the blog page of Microtek. So,
stay tuned with us.
H-57, Udyog Nagar,
PIN CODE: 110041