Aluzen System.pdf

Original file name: Aluzen System.pdf
This document has been shared on pdf-archive.com on 07/13/2016 at 13:45, from IP 86.192.***.***. This document download page have been viewed 195 times.
File size: 6228 KB (18 pages).

Share this document:


           


Document preview

Aluzen System for gates and fences Anton Prucniewicz Aluzen System features Aluminum system to create swing gates or sliding entrance gates for estates, enabling the execution of fencing with the same appearance. Product implemented in accordance with the European standard EN 13241-1 General regulations of performance and safety. The Aluzen system combines the concepts of quality, durability and elegance, possessing a range of easy fit accessories enabling simplified maintenance. The gate models are compatible with the classic automatic controls for swing gates or sliding gates. Aluminium Profiles The aluminum profiles are extruded in aluminum alloy 6060 for the architecture according to the NP EN 12020-02. The aluminum profiles that make up the Aluzen system are lacquered by the quality seal Qualicoat, including Seaside class (Equivalent Qualimarine), or anodised meeting the requirements of quality seal Qualanod Swing Gates Section of the main profiles is 50 mm with an average thickness of 2.5 mm. Possibility of implementing the gate 1 or 2 leaves of inner or outer opening with anti-entrapment system. There are several types of infill panels from 9 mm to 20 mm. Union of joints are made using special screws opening direct thread with anti-corrosion treatment. The union is reinforced with aluminum chocks. Pivot top hinge is injected aluminum with shaft of 20 mm in stainless steel allowing millimetric adjustment in 3 axes. Pivot bottom hinge is aluminum injected with shaft 20 mm allowing lateral adjustments. Pivot assembly in Copper-Aluminum, shaft 12 mm with multi-regulation. Hinges 2 leaves or 3 leaves with internal reinforcement plates enabling aluminum refining in the 3 axis . 2 Sliding Gate Section of the main profiles is 50 mm with an average thickness of 2.5 mm. Possibility of manufacture with several panel types 9 mm - 20 mm. Union of frame is made by special bolts opening direct thread and anti-corrosion treatment. The union is reinforced with aluminum chocks. Channel with self-adjustable support to adjust the rollers vertically. Lock with snap hook.


         





Download Aluzen System.pdf




PDF - Download document

Download original PDF file
(PDF1.7, 6228 KB)




Similar documents







Make a link to this document


  Link to document download page (short link)


  HTML code - Use this code to share your document on a Website, a Weblog or your Myspace profile


  BB-Code - Use this code to share your document on a Forum community


  Permalink - Permanent link to this document download page

QR-Code link to this page


Comments


comments powered by Disqus