Waste Tire Recycling Line .pdf
Original filename: Waste Tire Recycling Line.pdf
This PDF 1.7 document has been generated by WPS Office / , and has been sent on pdf-archive.com on 28/07/2016 at 08:42, from IP address 45.63.x.x.
The current document download page has been viewed 482 times.
File size: 266 KB (5 pages).
Privacy: public file
Download original PDF file
Waste Tire Recycling Plant Introduction
Automatic tire recycling plant is specialized for recycling tire and other rubber products by
crushing them into powder. The tire can be either steel tires or nylon tires with outer diameter of
less than 1200 mm. We have two kinds of tire recycling plant for you: large-scale tire recycling
plant and small-scale tire recycling plant. The final product of large-scale one is 5-60 mesh and
that of small-scale one is 5-30 mesh rubber powder. If processed by rubber grinder, the final
product can be 40-120 mesh fine powder.
Large-scale Waste Tire Recycling Plant
Small-scale Tire Recycling Plant
Features of Tyre Rubber Powder Production Line
1. To granulate waste tires into fine rubber powder with steel and fiber completely recycled at
2. High purity of rubber powder is 99%.
3. Tight construction, small space and simple technique flow.
4. Low energy consuming and good performance-cost ratio.
5. High autoimmunization, fewer labors requirement.
6. Unique design, high output and long service time.
7. In line have dust remover, equipment running pollution-free, no fine dust, no fiber fly in the
shop, meeting the environmental requirement of the government.
Flow Process of Processing Waste Tire to Rubber Powder
The rubber powder production line has the following working process to make waste tire to rubber
Waste Tyre→ Ring Cutter → Strips Cutter → Blocks Cutter → Big Conveyor → Rubber
Crusher→ Big Shaking Screen → Small Conveyor → Big Magnetic Separator→Small Shaking
Screen →Small Magnetic Separator → Fiber Separator → 5-30 Mesh Rubber Powder → Rubber
Grinder → 40-120 Mesh Fine Rubber Powder.
Main Parts of Tire Recycling Plant
1. Tire Debeader
Tire debeader uses hydraulic system to pull out the whole bead wire
of the tire.
2. Tire Shredding Machine
The belt conveyor carries the whole tire into the tire shredding
machine, which shreds the tire into rubber blocks.
3. Automatic Feeder
The automatic feeder conveys the rubber blocks into the crusher.
4. Rubber Crusher
Rubber crusher is the main machine of the tire recycling plant. It crushes the rubber blocks to
rubber powder, which falls onto the main vibrating screen.
5. Main Vibrating Screen
The main vibrating screen separates different sizes of rubber powder. Larger powder enters into
the automatic feeder which send the powder into the crusher for
the second crush. The powder with required mesh falls onto the
roughing magnetic separator. When processing nylon tire, the
thick nylon will flow onto the surface and can be taken out
6. Roughing Magnetic Separator
The roughing magnetic separator separates the steel wire from the tire crumb. Steel wire falls
down while crumb rubber enters into the vice vibrating screen.
7. Vice Vibrating Screen
Rubber crumb that meet the required size enters into the concentration magnetic separator. Larger
ones are conveyed back to the crusher for crushing again.
8. Concentration Magnetic Separator.
The rubber powder are processed by the magnetic separator again. Pure crumb are bagged
Specification of Tire Recycling Plant
Dimension (L*W*H) Weight
200kg for around 5-30 mesh rubber powder.
300-400kg for around 5-30 mesh rubber powder
500-600kg for around 5-30 mesh rubber powder.
Application of Rubber Powder
The crumb rubber made by the large scale tire recycling plant can be used for making rubber
flooring, playground surfacing, rubber mats, horse arena footing, artificial turf, reclaimed rubber,
modified asphalt, rubberized plastic, waterproof materials, rubber products, sole material, etc.
Different size has different applications.