What are P type solar cells. .pdf
Original filename: What are P-type solar cells..pdf
Title: Microsoft Word - What are P-type solar cells..docx
This PDF 1.3 document has been generated by Word / Mac OS X 10.11.4 Quartz PDFContext, and has been sent on pdf-archive.com on 12/08/2016 at 10:40, from IP address 45.114.x.x.
The current document download page has been viewed 236 times.
File size: 37 KB (1 page).
Privacy: public file
Download original PDF file
What are P-type solar cells?
Solar cells are large area p-n junctions. A p-type solar cell consists of a thin n-type silicon layer (doped
with phosphorus) over a much thicker p-type silicon layer (doped with boron). Electrical contacts are
applied to both sides. The n-side is the front side facing the sun. It is given an antirefelective coating,
over which is pasted a clear adhesive which holds the front protective glass layer.
Note: Don’t be surprised. This dope is legal and recommended, not by doctors, but by engineers.
Currently most of the crystalline solar cells are p-type. This is because of a lower cost of production. But
performance wise, p-type solar cells have certain disadvantages compared to n-type solar cells. There
are two main reasons. Firstly, p-type material is created by doping with boron (trivalent). Boron
undergoes some undesirable action with oxygen in the presence of light, which reduces efficiency of
conversion. This is called Light Induced Degradation or LID.
To understand the second disadvantage, note that sunlight breaks loose electron hole pairs. If this takes
place in the p-type region, the electron is a minority carrier in this region. It risks getting absorbed by
one of the surrounding holes which are the majority carriers. In this case the solar energy absorbed will
be lost as heat, and contribute to heating up the cell. Our goal is to allow the electron to drift to the
depletion region where it will be swept by the electric field to the n-type material, and on to the
cathode. In other words, the diffusion length of minority carriers must be as long as possible. In the Ptype cell this is less than the n-type. The n-type cell allows better diffusion length.
It is estimated that once manufacture of n-type solar cells becomes cost effective, it will give better
efficiency of conversion than p-type solar cells. For this reason a lot of research is currently going on to
permit more cost effective production of n-type cells.