scotts tractor c4013 050.pdf
Record the following information about your unit so that you will be able to provide it in case of loss or theft.
PURCHASE DATE: -
I- I -
(Enter complete 8 digit number from model plate on unit)
CODE NO.: - - - - SERIAL NO.: - - - - - -
DEALER'S NAME AND ADDRESS: - - - - - - - - - - - - - - - - - - - - CITY:
STATE: - - - - - - TELEPHONE: - - - - - - -
This tractor can be dangerous if usedcarelessly. Read the Owner's Manual thoroughly before operating
the tractor. Always wear safety glasses or eye shields while assembling or operating the tractor. Do Not
carry passengers at any time. Keep hands, feet, hair and loose clothing away from the discharge area,
underside of the mower deck or any moving parts while the engine is running. Do Not allow children or
young teenagers to operate or be near the tractor while it is operating. Reduce engine to idle when
tractor is not moving. If tractor is to remain stopped for more than 2 minutes, stop the engine.
ASSEMBLE YOUR TRACTOR
References to the right side and left side of this
tractor are as you are seated in the operator's
seat, facing forward.
ASSEMBLY TORQUE REQUIREMENTS FOR ALL NUT & BOLT, STEEL TO
STEEL APPLICATIONS, FOOT-LBS
CONTENTS OF SHIPPING CARTON
1 - Tractor (with 40 inch Mower Deck)
1 - Owner's Manual
1 - Engine Manual
1 - Steering Wheel
1 - Seat
1 - Battery Acid Pack
1 - Bag of Assembly Parts Containing:
1 - 1/4 x 2 inch Spring Pin (Steering Wheel)
4 - 11/32 inch Flatwashers (Seat Assembly)
4 - 5116 inch Split Lockwashers (Seat Assembly)
4- 5116-18 x 3/4 inch Hex Head Screws (Seat
1/2 inch Wrenches (or adjustable wrenches).
7116 inch Wrenches (or adjustable wrenches).
Small Phillips Screwdriver with a 1/4 inch shank
1 -114 x 2 Inch Spring Pin
1. Head identification for each grade.
2. Reduce the torque by 30% when installing into
3. Reduce torque by 50% when threading into
non-extruded sheet metal parts.
YOU WILL NEED THESE TOOLS
4- 5/16 x 3/4 Inch
Hex Head Screws
2- lgnHion Keys