How To Setup And Configure An Extended Wireless Network .pdf
Original filename: How To Setup And Configure An Extended Wireless Network.pdf
This PDF 1.5 document has been generated by Zamzar, and has been sent on pdf-archive.com on 24/10/2016 at 08:58, from IP address 111.93.x.x.
The current document download page has been viewed 255 times.
File size: 72 KB (2 pages).
Privacy: public file
Download original PDF file
How To Setup And Configure An Extended Wireless
Network In Airport Base Stations?
As similar to innovative and highly technical products Apple is also known for
producing wide range of routers to setup a strong Wi-Fi network. Most of the
Apple users prefer this AirPort router because of its advanced technology. But,
like the other technology users may also face trouble with this AirPort router.
Problem is natural because not everyone is technically superior. Recently, some
users have asked for a proper setup and configuration of Apple AirPort base
station router with an extended wireless network. Here, in this situation users can
have a technical helpline number for Apple Airport router or you may also go
through this article post.
To learn about expanding Wi-Fi network, you need to consider some of things.
And to know about these considerations, you can have an Apple experts’ support
or you may also have an support phone number for Apple firewall. You can also
go through the instruction shown as below:
First, setup components of an extended network in the category as
Primary Wi-Fi base station
Extended base station
Make the configuration for wireless extended network
For creating an extended Wi-Fi network, you need to place extended Wi-Fi
stations within the range of primary Wi-Fi base station. If you have already made
the configuration of Wi-Fi station then you can do a factory default reset for every
Wi-Fi base station.
Make the configuration for primary Wi-Fi base stations
Turn on power for all 802.11n Wi-Fi stations and make them to appear with
AirPort Menu Extra.
On a Mac select Go > choose desktop applications>Utilities folder > AirPort
Now, choose primary Wi-Fi base station and click on continue. If you see
message indicating the reset of Wi-Fi base station, click on continue.
Click on Manual setup and enter the password.
Now, click on AirPort and then Wireless.
Now, from the Wireless mode menu click on create a wireless network.
Make a tick on checkbox showing ‘Allow this network to be extended’.
Enter name for wireless network.
Go to the Radio channel selection menu and choose Automatic.
Click on update.
Now, your extended Wi-Fi base station has been added to the Wi-Fi base station.
As, similar to primary base station, you can also configure extended Wi-Fi base
station. However, if you find any trouble or you need any support then you can
dial an Apple technical support number.