Variable Speed Low Voltage Converter .pdf
Original filename: Variable Speed Low Voltage Converter.pdf
This PDF 1.7 document has been generated by WPS Office / , and has been sent on pdf-archive.com on 26/10/2016 at 04:53, from IP address 23.81.x.x.
The current document download page has been viewed 162 times.
File size: 182 KB (4 pages).
Privacy: public file
Download original PDF file
Variable Speed Low Voltage Converter
Max. output frequency: 0~500HzInput frequency resolution
Analog setting：Max. frequency×0.025%
Control mode: V/Fcontrol
Start torque: 1.0Hz/150%
SD90 series variable speed low voltage converter is a small compact
power converter, this is aim at small automation equipment of
economical type and especially suitable for electronic equipment, food
packaging, woodworking and other small power transmission.
SD90 Series Variable Speed Low Voltage Converter features and
1.The industry of advanced vector control algorithm.
2.Vector mode 0 control has better low speed stability , more strong low
frequency torque output capacity and better dynamic response.
4.Multi-step speed control, simple PLC, PID module and pulse counting
5.Stable and reliable anti tripping function.
6.Stable and reliable overvoltage, overcurrent loss speed control
algorithm, instantaneous power lost non-stop control to prevent
frequent trip under complex applications.
Variable Speed Low Voltage Converter specificaiton
Speed range: 1：50
Type G：150% Rate current 60/s；
Type P：110% Rate current 60/s
Auto Torque boost : Manual
Torque boost 0.1%~20.0%
Four modes: Line, Multi-point , Square V/F curve, V/F separation
Line or S-curve Acc/Dec mode : four kinds of Acc/Dec times. Range of
Acc/Dec Time : 0.0~6000.0s
DC brake frequency：0.00Hz~Max frequency
Jog frequency range：0.00Hz~50.00Hz
Simple PLC Multi-speed running: 16-speed operating through built-in
PLC or control terminal
Onboard PID: It realizes process-controlled closed loop control system
(AVR): It can keep constant output
voltage automatically when the main voltage changes
Overvoltage stall control: The current and voltage are limited
automatically during the running process so as to avoid frequent tripping
due to overvoltage/overcurrent.
Rapid current limit: It helps to avoid frequent over-current faults of the