Speed control VW Polo 6R (englisch) (PDF)




File information


Author: Christoph Heinzelmann

This PDF 1.4 document has been generated by Microsoft® Word 2016 / GPL Ghostscript 9.15, and has been sent on pdf-archive.com on 27/01/2017 at 16:25, from IP address 93.142.x.x. The current document download page has been viewed 1430 times.
File size: 1.07 MB (13 pages).
Privacy: public file
















File preview


Version 1.14
(01.11.2016)

Installation instruction
Speed control

Article no.:

37921

37922
37922-1
37922-2
37922-3

VW Polo 6R

www.kufatec.de
Kufatec GmbH & Co. KG • Dahlienstr. 15 • 23795 Bad Segeberg • e-mail: info@kufatec.de

Contents
Scope of delivery 37921 ........................................................................................................................ 1
Scope of delivery 37922, 37922-1, 37922-2, 37922-3............................................................................. 1
Copyright .............................................................................................................................................. 2
General advice ...................................................................................................................................... 2
Safety instructions ................................................................................................................................. 3
References of legal regulations for operation ......................................................................................... 3
Installation instructions .......................................................................................................................... 4
Plug occupation Drop arm .................................................................................................................... 6
Connection BCM on-board control unit................................................................................................... 6
Single wire of the engine control unit ...................................................................................................... 7
Coding VAS ........................................................................................................................................ 10

Scope of delivery 37921
-

Cable set

Scope of delivery 37922, 37922-1, 37922-2, 37922-3
-

Cable set
Original drop arm

1

Copyright
Our assembly and operation manuals, assembling diagrams and additional documentation in text or
picture form are protected by law.
Disclosure and distribution of this documentation through print or online media is permitted only after
previous written acceptance from Kufatec GmbH & Co. KG.

General advice
While developing this product, your personal safety combined with the best operating service, modern
design and an up-to-date production technique was especially taken into account.
Unfortunately, despite the utmost care injuries and/or damages might occur due to improper installation
and/or use.
Therefore please read with great care and completely this operating manual and store it appropriately!
For your safety all our products pass through a 100% control check.
We reserve the right to carry out technical changes which serve the improvement at any time.
According to each article and purpose, it is sometimes necessary to check each country’s legal
regulations before installing and starting the unit.
In case of guarantee claims, the device has to be sent back to the seller in the original packaging with
the attached bill of purchase and detailed defect‘s description. Please pay attention to the manufacturer‘s
return requirements (RMA). The legal warranty directions are valid.
The warranty claims as well as the operating permissions become invalid due to:
a) unauthorized changes to the device or accessories which have not been approved or carried
out by the manufacturer or its partners
b) opening the device‘s frame
c) self-made repairs on the device
d) improper use / operation
e) brute force to the device (drop, willful damage, accident etc.)
During installation, please pay attention to all safety relevant and legal directions.
The device has only to be installed by trained personnel or similarly qualified people.
Please limit the failure search to ca. 0,5 hour for the mechanical resp. 1.0 hour for electric labors
during the assembly or functioning problems.
To avoid unnecessary additional expenses please send immediately an inquiry to our technical support
using the Kufatec form (http://www.kufatec.de/shop/de/infocenter/).
Please provide always the following information:
 chassis number
 part number of the add-on kit
 exact description of the problem
 already executed labor

2

Safety instructions
The installation can be executed only by trained qualified personnel. Before the installation disconnect
the power supply. Therefore cut off the battery from the vehicle electric system, follow the manufacturer’s
specification.
• Never use bolts, screws and other fastening elements from car’s safety devices or steering
wheel, brakes because it may influence your driving safety and cause accidents.
• Connect the device only to a 12V vehicle voltage with chassis ground to the car body. This unit
cannot be used in large trucks or other vehicles which use a DC 24 V battery wiring system
voltage.
• Avoid to install the device in places where it could hinder the safe driving or functional efficiency
of the other units installed in the vehicle.
• This unit is only for the use with the following vehicles and model line; Only connections
described within this instruction manual are allowed or required to use for installation.
• For damage impact caused by faulty installation, unsuitable connections or assembling in
inappropriate vehicle types or models Kufatec GmbH &Co.KG assumes no liability.
• We advise you that these units process data out of the MOST protocol from the vehicle. During
the assembly of this unit we as supplier have access to a specific model and we as producer don’t
know the overall system you work with.
• Especially in case of changes within the same model line and the same model year we don’t
guarantee the usability of our products. In case of the usability of our products with the
manufacturer’s changes Kufatec GmbH assumes no liability.
• Kufatec GmbH assumes no liability that the assembly of the unit described in this manual is
approved according the warranty regulations of the single car manufacturers. Please check your
manufacturer’s conditions and warranty before you begin the installation.
• Kufatec GmbH reserves the right to change the device specification without further notice.
• Errors and changes excepted.

References of legal regulations for operation
Use this unit in the intended domain only.
If you use the unit in a foreign domain, if the unit is not installed properly, or if the unit will be
reconstructed the operating permit and warranty will expire.

3

Installation instructions

2
1

3

Fig.1

1 – Speed control Drop arm

2 – BCM on-board control unit

3 – Engine control unit
Pull the steering wheel toward yourself as far as possible using the regulation and adjust in a 90
degree position . Dismantle the air bag unit.

Fig.2

Fig.3

For this purpose on the rear side the bows have to be levered out of the frame using a short, wide
screwdriver. Disconnect the connection of the airbag unit and take it out.

Fig.4

Fig.5

4

Turn the steering wheel back in the original position. Dismantle the screw with internal serrations.
The position of the steering wheel must not be changed.
Mark the steering wheel position.

Fig.6

Fig.7

Fig.8

Flap the top steering wheel cover aback. Loosen the Torx-screw of the lower steering wheel cover.
Loosen the screws of the lower steering wheel cover and unlock the cover.

Fig.9

Fig.10

Fig.11

Loosen the locking of the slip ring – remove the slip ring.
The position of the slip ring must not be changed .
Loosen the screw of the clip of the drop arm – disconnect the plug connection - dismantle the speed
control unit lever.

Fig.12

Fig.13

5

Plug occupation Drop arm
Remove the locking of the plug – pin in the single wires - see the imprint.

Fig.14

Fig.15

Dismantle the covering underneath the steering wheel (fig. 2).

Fig.16

Fig.17

Fig.18

Connection BCM on-board control unit
Take out the A + B plug. Actuate the locking and connect the wires according to the
imprint .

Plug
Plug
Plug
Plug
Plug

Fig.19

6

A
B
B
B
B

– PIN
– PIN
– PIN
– PIN
– PIN

44 (braze on)
44
45
47
46 (LED wire)

Single wire of the engine control unit
Remove the protective grate – laying of the wires into the engine compartment.

Fig.20

Fig.21

Dismantle the wipers. Remove the hose of the air filter. Loosen the screws of the engine control
unit and take out to the front. Remove the plastic cover cap of the boot.

Fig.22

Fig.23

Lay the single wires through the boot into the engine compartment. For this purpose use a support
wire.

Fig.24

7

Lay the single wire toward the engine control unit. Remove the plug – consider the locking.

Fig.25

NOTE:

The quantity of PINs can vary depending on the engine control unit – see table.

Carefully lever out the plug connector insert, purple lock of the connector pull out, only then pull out the
blindpin.

Fig.26

Fig.27

Integrate the single wires according to the engine code letters. Snap the locking safely back in place!

Fig.28

NOTE: PIN occupation can vary depending on the engine code letter MKB

8






Download Speed control VW Polo 6R (englisch)



Speed control VW Polo 6R (englisch).pdf (PDF, 1.07 MB)


Download PDF







Share this file on social networks



     





Link to this page



Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..




Short link

Use the short link to share your document on Twitter or by text message (SMS)




HTML Code

Copy the following HTML code to share your document on a Website or Blog




QR Code to this page


QR Code link to PDF file Speed control VW Polo 6R (englisch).pdf






This file has been shared publicly by a user of PDF Archive.
Document ID: 0000544706.
Report illicit content