Original filename: guide.pdf
This PDF 1.5 document has been generated by Microsoft® Word 2013, and has been sent on pdf-archive.com on 02/03/2017 at 05:34, from IP address 99.247.x.x.
The current document download page has been viewed 639 times.
File size: 258 KB (3 pages).
Privacy: public file
Download original PDF file
１、Open the back panel.
After you remove the 20 screws marked with red circle, you can remove the back panel.
２、Remove the lamp holder.
Method: Rotate the lamp holder counterclockwise.
３、Please confirm that if the LED is loose. If it is, please press the LED.
4、Remove the button.
Method: Remove the nut used for fixing the button.
5、Remove the button panel
Method: Please use 2 fingers to gather the 2 white protrusions together, and at the same
time push it downward, then you can remove the button panel.
６、Check that if there is burr in the surrounding of the button, if there is burr in it, please
use a knife to scrape it from the button.
7、Install the button panel
Method: Firstly, you need to install the spring back, then use a finger to press the spring.
When installing the button panel, you had better install one of the white protrusions first, then
put the other one in the hole.
８、Please check that if the spring is dislocation. In normal situation, the spring should be
９、Install the button.
Method: Screw the nut used for fixing the button.
10、Install the lamp holder.
Method: Rotate the lamp holder clockwise.