DEVRYCOMP 122 Lab 5 Lab Report and Source Code .pdf
Original filename: DEVRYCOMP 122 Lab 5 Lab Report and Source Code.pdf
This PDF 1.5 document has been generated by Microsoft® Office Word 2007, and has been sent on pdf-archive.com on 03/03/2017 at 09:19, from IP address 43.224.x.x.
The current document download page has been viewed 195 times.
File size: 215 KB (4 pages).
Privacy: public file
Download original PDF file
DEVRYCOMP 122 Lab 5 Lab Report and Source
Check this A+ tutorial guideline at
For more classes visit
COMP 122 Week 5 iLab
Apply structured and modular design principles to write programs that meet written
specifications and requirements. Develop a pseudo-code design using appropriate
program structure (sequence, selection, repetition and nesting) to solve a given
programming problem. Use appropriate selection and repetition statements to
implement the design. Create user-defined functions to implement a modular design.
Use appropriate parameter passing mechanisms for passing data into and getting
data back from functions. Use ostream and iomanip formatting manipulators to
display tabulated data. Design and implement a menu-driven interface.
This program is to give the user the option of converting a set of temperatures either
from Celsius to Fahrenheit (C to F) or vice versa, from Fahrenheit to Celsius (F to C),
or to quit the program. If the user selects either C to F or F to C, the program will
prompt the user to enter three integer values, a starting temperature, an ending
temperature, and an increment. After these values have been entered the program
will display a table of equivalent C and F (or F and C) temperatures, from the starting
temperature to the ending temperature and incrementing by the increment value
The table must meet all of the following criteria:
The table's column headings should display the degree symbol, e.g., °C and °F. The
first column must be the "from" temperature (C for C to F or F for F to C) and the
second column the "to" temperature (F for C to F or C for F to C). The calculated "to"
temperatures are to be displayed to the nearest tenth of a degree (display exactly
one decimal place, even if there is no fractional part, i.e., 75° should display as 75.0°).
Temperatures in both columns must be number-aligned (right-justified for the
integer "from" values and decimal point aligned right for the "to" values). Assume
the user enters correct data, e.g., the start temperature, end temperature and
increment are all integers and the ending temperature is greater than the starting
The formula to convert Celsius to Fahrenheit is
The formula to convert Fahrenheit to Celsius is
You must create and use the following functions:
displayMenu( ) displays a menu. getMenuSelection ( ) gets the menu selection from
the user, upper or lower case 'C' for Celsius to Fahrenheit, upper or lower case 'F' for
Fahrenheit to Celsius, and upper or lower case 'Q' to quit. Any other input should get
an error message "Invalid selection: try again" and re-prompt for the menu selection.
getStartEndAndIncrement( ) gets the start, end and increment values for the table
from the user. CtoF( ) converts a Celsius temperature to Fahrenheit. FtoC( )converts
a Fahrenheit temperatures to Celsius. displayTable( ) displays a C to F or F to C table
given start, end and increment values and the conversion character the user
Absolutely NO GLOBAL VARIABLES can be used to implement this program! Any
program using global variables will NOT be accepted! Use a switch statement to
respond to the user's menu selection in the getMenuSelection function. After the user
selects a valid temperature table option, ask the user to enter start, end, and
increment values, then display the table and stop until the user presses the ENTER
key to continue (prompt the user, of course). When the user presses ENTER to
continue the menu should be redisplayed, allowing the user to make another menu
selection (either to display another temperature conversion table or quit). Make
sure that your code is properly formatted (indentation, etc) and that you have
provided suitable documentation of all your functions (comment blocks for program
How to print the degree symbol
It is easy enough to find out how to do this by searching the web. The short answer is:
Test cases are generally selected by analyzing the program and determining
categories of inputs and outputs, then specifying at least one specific input value (or
set of input values) for each category. Inputs for this program include the "selection,"
or menu input, and integer values to generate a table (start temperature, stop
temperature and increment value). Here is an outline of the categories:
Menu test cases should include all possible valid menu selections and at least one
invalid menu selection. Table test cases should include
2.1. Inputs that create tables with various numbers of rows
2.2. At least one temperature that calculates to an exact whole number of degrees
(e.g., 0 degrees degrees F).
2.3. Negative starting and ending temperatures.
2.4. At least one temperature that calculates to a fractional number of degrees (e.g., 50 degrees degrees C).
2.5. Some common, easy to verify conversions, for example
2.5.1. 0 degrees degrees F (and vice versa)
2.5.2. 100 degrees degrees F (and vice versa)
2.5.3. -40, the only temperature that is the same in both.
Given these categories, use the table on the next page to record the specific input
values you will use for your test plan. Note that you must predict and document what
the output will be for each of your test cases, including the calculated values for each
row of the temperature tables produced. Test your program using your selected test
cases and record the actual observed output from your test cases by pasting screen
shots into your report document. Make sure everything works correctly before