Jammers4u CT 6067 UAV Drone Jammer User manual V.16.12 (PDF)




File information


Title: Jammers4u
Author: Toshiba

This PDF 1.5 document has been generated by Microsoft® Word 2010, and has been sent on pdf-archive.com on 05/03/2017 at 09:44, from IP address 85.203.x.x. The current document download page has been viewed 514 times.
File size: 882.32 KB (6 pages).
Privacy: public file
















File preview


CT-6067 Series
Pelican jamming system

User manual

1

Foreword
This manual is the operating instructions of the CT-6067 Series Jammer (referred to as the
“unit” in this manual).

The unit outputs 15-100W for each of the 6 bands 1570-1620MHz,

2400-2500MHz, 433MHz, 5700-5900MHz, 865-920MHz, 1220-1260MHz

Safety guidelines
Read the following guidelines before using the unit.
guidelines may be dangerous or illegal.

Failure to comply with these

In any event of doubt, consult your local

distributor or Vendor’s support staff before use.
Handling and transportation
Take maximum care while handling the unit.
Environmental conditions
Do not place the unit near heat sources.

The unit dissipates a lot of heat.

block its ventilation holes and do not insert any objects through them.

Never

Always

allow at least 10 cm clearance in front of ventilation holes on two sides for free air
circulation
Qualified service
Only trained service personnel qualified by Vendor are allowed to diagnose and maintain
the unit in accordance with established safety practices and standards.

Features
 Jamming frequency


CH1: 1570MHz-1620MHz 100W



CH2: 24000MHz-2500MHz 100W



CH3: 433MHz 100W



CH4: 5700MHz – 5900MHz 15W



CH5: 860MHz – 920MHz:100W



CH6: 1220MHz – 1260MHz :100W

 The unit has output power for 100W for each of Five bands and 5.8GHz is 15W
 Omni antennas (3-8dBi).

2

 The Conditions in the system are indicated by the LEDs.
 The input power applied from 110V or 220V AC.

General Description

6 Omni
Antnnas
Power
Adapter

Main Power Switch

Antenna’s Cable

AC Power Adaper

External Battery

Power Switch
All Dins Down…Max
Output Power

AC 110-240V
Power
Cable
3

***NOTE***:
Before you turn on the jammer, please………..
Make sure connect all Antennas to the jammer

Quick Installation:
Step 1:
Connect all antennas to the Same CH Bands…CH1 to CH1….

CH4: 5800MHz

CH3: 433MHz

CH2: 2400MHz
CH5: 868MHz

CH1: GPS L1 MHz
CH6: GPS L2 MHz

CH5: 868MHz

CH3: 433MHz

CH1: 1575MHz

CH6: 1220MHz

CH4: 5800MHz

CH2: 2400MHz

4

Step 2:
Turn “ Main Power” ON
Step 2:
Switch ON
on Main Power after you
connect all Antennas to
the Jammer

Step 3:
Turn Each Band “ ON “…….

Step 3:
Switch ON Each Band

Step 4:
Turn Each Band Output Power to MAX… ALL Dins DOWN to MAX.
Power Switch
All Dins Down…Max
Output Power

5

External Battery Options: B-50AH

AC 220V Power
Cord for Charging

Connect to Jammer

Main Siwtch

Battery LED Status

Battery AH Percent
Left

Battery AH Left

Estimated Working
Time Left

Current Battery Vlotage

The Jammer work
Current Amp

6






Download Jammers4u CT-6067-UAV Drone Jammer User manual V.16.12



Jammers4u CT-6067-UAV Drone Jammer User manual V.16.12.pdf (PDF, 882.32 KB)


Download PDF







Share this file on social networks



     





Link to this page



Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..




Short link

Use the short link to share your document on Twitter or by text message (SMS)




HTML Code

Copy the following HTML code to share your document on a Website or Blog




QR Code to this page


QR Code link to PDF file Jammers4u CT-6067-UAV Drone Jammer User manual V.16.12.pdf






This file has been shared publicly by a user of PDF Archive.
Document ID: 0000563988.
Report illicit content