How to recycle radiator scrap .pdf
Original filename: How to recycle radiator scrap.pdf
This PDF 1.7 document has been generated by WPS Office / , and has been sent on pdf-archive.com on 10/03/2017 at 07:36, from IP address 45.120.x.x.
The current document download page has been viewed 182 times.
File size: 49 KB (2 pages).
Privacy: public file
Download original PDF file
How to Recycle Radiator Scrap?
Radiator is widely used in cars, trucks and other automobiles. Radiators were also once an
essential part of a home heating system. In today’ s life, AC radiator is more known by commons.
Before discussing how to recycle radiator, let’s have a general knowledge of this three kinds of
Car radiators was almost born with the automobile itself. We know that, as the engine starts
working, too much heat will generate,which will cause the engine to seize or even stop working.
The radiator pumps a mixture of water and antifreeze into the engine block to help it stay cool.
Radiator in older cars were likely made of brass or copper. In newer cars, radiators are typically
constructed out of aluminum which is lighter and less expensive. Radiators also have headers or
tanks at each end to hold the coolant. These can be made of brass, aluminum or plastic.
Unlike a car radiator, heating radiator is used in your home for heating.It appeared in mid-1980s
and fell out of use in the mid-1900s. This kind radiator is always made of cast iron.
The present air conditioner is usually made of compressor, radiator, throttle and evaporator. Gas
and fluid are exchanged in radiator, at the same time, the pressure and temperature change.
Without radiator, it can’t cool and warm the house. Now radiator is usually made of copper tube
and aluminum foil. Both of them have great recyclable value.
Now let’s say how to recycle them. Unless you work on cars yourself, you won’t have chance to
see radiator and do not really want to. The best way for you to recycle your radiator is to let your
mechanic remove it and recycle it, or recycle your entire car. Radiator in your home should also be
recycled at a scrap metal yard.
The recycling of AC radiator is a little complex since the copper tube is covered by aluminum foil.
To recycle it, we can use radiator copper&aluminum stripper. Amisy radiator recycling machine
can strip the radiator whose copper tube center distance is 19 mm, 21 mm and 25 mm. The scrap
radiator fin should be put into the inlet smoothly and the stripped copper pipes and aluminum foil
can be discharged automatically. After being separated, the copper tube will keep complete and the
aluminum foil will become irregular pieces.