PDF Archive

Easily share your PDF documents with your contacts, on the Web and Social Networks.

Share a file Manage my documents Convert Recover PDF Search Help Contact

Holley manual.pdf

Preview of PDF document holley-manual.pdf

Page 1 2 34597

Text preview

A Windows compatible laptop computer (or PC for initial setup) is required for use with Holley
HP/Dominator software. The computer must be capable of running Windows XP, Vista, or Windows 7.
The laptop must also have a graphics resolution of at least 1024 x 768 to view all areas of the screen
(although a higher resolution will reduce the need to scroll in some screens). Communications are via a
USB communications port.

3.1 Software Installation
3.1.1 Windows XP, Vista, or Windows 7

Holley EFI software is designed to run on Windows XP, Vista, or Windows 7 operating systems.

1. Insert the CD Rom (included with the ECU) into the CD drive of your laptop. The CD should run
automatically. If it does not go to “Start” and “Run” and select “Browse”. Select the CD drive the
install disk is located on and search and select the setup executable file.
2. Follow on screen prompts to load the software.

3. Once the software is installed, a Holley EFI icon (below) should appear on the main computer
screen. When you double-click on this icon, the software should open. You will see a main menu.
Click “Cancel” at the bottom for now. If you are running Windows Vista or Windows 7, you need the
software setup such that you are the “administrator”. If you have any problems opening the
software or otherwise, you must perform the following steps:

Select the “Start” button

Select “Computer” and select drive “C”.

Select “Program Files” or “Program Files (x86)”

Select “Holley” and then select “EFT”

Right click your mouse on “Holley.exe”

Select “Run as Administrator” and the software should run properly.