R3 Instructions .pdf

File information

Original filename: R3 Instructions.pdf
Author: Ben

This PDF 1.5 document has been generated by Microsoft® Word 2016, and has been sent on pdf-archive.com on 13/04/2017 at 02:44, from IP address 110.140.x.x. The current document download page has been viewed 506 times.
File size: 732 KB (4 pages).
Privacy: public file

Download original PDF file

R3 Instructions.pdf (PDF, 732 KB)

Share on social networks

Link to this file download page

Document preview

Renken Yamaha R3 Fender Eliminator Installation Instructions
Parts Included:
Renken Yamaha R3 Fender Eliminator
2 x indicator spacers
Velcro cable tie
4 x bolts and lock nuts
2 x washers
2 x Licence plate light spacers

Tools Required:
8mm wrench
10mm wrench
4mm Allen key
Philips head screw driver
Tool kit under R3 passenger seat cowl

Expected Installation Time: 5-15 minutes

1. Remove OEM Fender
a) Remove passenger seat (key hole on left side of body)

b) Remove seat trim (two screws with Allen key heads)

c) Remove front seat (two 8mm bolts)

d)Remove plastic tray (two pop rivets)

d) Disconnect indicator terminals (4 bullet connectors under clear plastic insulator) and licence plate light

e) Remove OEM fender (four 10mm nuts) and set aside nuts for use later

2. OEM Fender Disassembly
Completely dissemble entire OEM fender by removing all fasteners.
Set aside the following for use later:
a. OEM indicator assembly
b. Bolts used to secure OEM fender to body
c. Licence plate light

3. Renken Fender Eliminator Instillation
a. Install OEM licence plate light to fender eliminator using provided fasteners and spacers


c. Fit indicator spacers to OEM indicators

d. Install OEM indicators with spacers to fender eliminator (if having difficulty apply a small amount of oil)
- Green and Black connectors go on right side
- Brown and Black connectors go on left side


Attach licence plate to fender eliminator
Bolt fender eliminator to bike using bolts saved from step 2.b (reverse of step 1.f)
Feed indicator and licence plate cables into bike and secure with provided cable tie
Re-connect indicators and licence plate light cables (reverse of step 1.e)
Reinstall front seat, seat trim, plastic tray and rear seat (reverse of steps 1.d,c,b)

Terms & Conditions:
Renken R3 fender eliminator has been designed for the use of modifications, Renken is not responsible to misuse of products, or verification of
the transport regulatory authority. Installation should only be performed by experienced motorcycle mechanics. If you do not possess the
tools or experience to complete the instillation, contact a qualified mechanic. Failure to properly install this part could result in damage of
property, injury or death. Renken is not responsible for damages incurred from improper use or instillation.

Document preview R3 Instructions.pdf - page 1/4

Document preview R3 Instructions.pdf - page 2/4
Document preview R3 Instructions.pdf - page 3/4
Document preview R3 Instructions.pdf - page 4/4

Related documents

r3 instructions
renken honda grom 2016 17 instructions
60 72 chevy truck web
47 59 chevy truck web
73 87 chevy truck web
documentation gaku face plate and housing version 1 1

Link to this page

Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..

Short link

Use the short link to share your document on Twitter or by text message (SMS)


Copy the following HTML code to share your document on a Website or Blog

QR Code

QR Code link to PDF file R3 Instructions.pdf