How to Recycle Motor Scrap .pdf
Original filename: How to Recycle Motor Scrap.pdf
This PDF 1.7 document has been generated by WPS Office / , and has been sent on pdf-archive.com on 14/04/2017 at 11:13, from IP address 45.120.x.x.
The current document download page has been viewed 143 times.
File size: 66 KB (1 page).
Privacy: public file
Download original PDF file
How to Recycle Motor Scrap?
Metal recycling is always a big part in the whole recycling industry. Electric Motor also contains
some kinds of metal like copper, steel or aluminum. Is it worth to recycle motor scrap? Simply
speaking, the answer is yes.
Copper ones are the most common electric motors used because they do such a great job of
conducting the electricity and power through the appliance they are used in. They are worth a lot
more than ordinary scrap iron. To get full value, just disconnected it from a mounting base, pulley,
pump or anything else that may be attached. The idea is to sell just the motor itself so the ratio of
steel to copper will be correct when the consumer buys it for recycling.
Some appliances,like washers and dryers, have electrical motors with aluminum winding. These
are merely worth scrap iron price. The fate of them is to be sent to a shredder so the aluminum can
be separated from the steel after it is ground up.Refrigeration compressors are used in air
conditioning units, refrigerators and freezers. They have copper winding inside a steel shell. The
steel content is heavier than it is in the electric motors, so they bring less money, but it is still quit
a bit more than ordinary scrap iron.
Another problem is how to recycle them efficiently. Still by hand ？ You are kidding. Motor
recycling machine is designed to recover the copper wire in various scrap motors. By using it,
copper wire and silicon steel case can be recycled efficiently, greatly improving economic benefits.
Motor recycling machines consist of two machines:copper cutting and copper wire pulling
machine. Copper wire cutting machine is used to cut one end of copper winding in the motor,
while copper wire pulling machine is used to pull copper winding out of the motor.