3. 4. Feeder Terminal Unit R200 Manual V2 9 Chardon 20150416 .pdf

File information


Original filename: 3. 4. Feeder_Terminal_Unit_R200_Manual_V2_9_Chardon_20150416.pdf
Author: 夜來香

This PDF 1.5 document has been generated by Wordìš© Acrobat PDFMaker 9.0 / Adobe PDF Library 9.0, and has been sent on pdf-archive.com on 14/05/2017 at 12:33, from IP address 115.127.x.x. The current document download page has been viewed 2104 times.
File size: 6.5 MB (160 pages).
Privacy: public file


Download original PDF file


3. 4. Feeder_Terminal_Unit_R200_Manual_V2_9_Chardon_20150416.pdf (PDF, 6.5 MB)


Share on social networks



Link to this file download page



Document preview


Feeder Terminal Unit

for Distribution Automation

Auto Recloser Control
Model Name : FTU-R200

Technical Manual V2.9

REVISION HISTORY
REV

DATE

DESCRIPTION

1.0

2010-02-24

Draft

1.1

2011-07-04

Updated

1.2

2011-09-30

Added Appendix 1.

2.0

2012-08-22

Updated (Functions were improved)

2.1

2013-02-04

Function of Programmable button was added.

2.2

2013-04-01

Loop scheme was added only for Indonesia

2.3

2013-10-14

Interrupter duty monitor function was added

2.4

2014-02-20

Negative Sequence OC was changed to I2/I1.
And delayed closing function was added.

2.5

2014-03-10

Loop automation scheme was added as a
standard function. IoCos pickup mode was added

2.6

2015-03-02

Block & Logic diagram were added.

2.7

2015-03-10

Power supply board block diagram was added

2.8

2015-04-03

Directional element and reclosing for NSOC was
removed in the trip sequence logic.
(F/W version:4.09)

2.9

2015-04-06

Chardon Korea Version
The description of Hot line tag button was added.

TABLE OF CONTENTS

1. Overview ............................................................................................ 1
1.1.

Protection of Distribution Lines .................................................................. 1

1.2.

Function of Automatic Circuit Recloser ......................................................1

1.3.

Main Features of FTU-R200 ...................................................................... 2

1.4.

Block Diagram of FTU-R200 ...................................................................... 5

1.4.1.

Typical Structure of control cabinet ..................................................................................... 5

1.4.2.

Block Diagram of FTU Boards .............................................................................................. 6

1.4.3.

Block Diagram of Power Supply Board ................................................................................ 7

2. Technical Data ................................................................................... 8
2.1.

Digital Processor ......................................................................................... 8

2.1.1.

Dual Processor Architecture.................................................................................................. 8

2.1.2.

Analog/Digital Conversion .................................................................................................... 8

2.1.3.

DSP ......................................................................................................................................... 8

2.1.4.

CPU ......................................................................................................................................... 9

2.1.5.

Functional Block Diagram ..................................................................................................... 9

2.2.

Environmental Conditions ....................................................................... 10

2.3.

Inputs/Outputs .......................................................................................... 11

2.4.

Measurement .............................................................................................13

2.4.1.

Current ................................................................................................................................. 13

2.4.2.

Voltage .................................................................................................................................. 13

2.4.3.

Power .................................................................................................................................... 13

2.4.4.

Power Factor ........................................................................................................................ 14

2.4.5.

Frequency ............................................................................................................................. 14

2.4.6.

Energy ................................................................................................................................... 14

2.4.7.

Harmonic.............................................................................................................................. 14

2.4.8.

Demand Current and Power................................................................................................ 15

2.5.

Communication..........................................................................................16

2.5.1.

Physical Layer ...................................................................................................................... 16

2.5.2.

Protocol for scada ................................................................................................................ 17

2.6.

Recording .................................................................................................. 18

2.6.1.

Event Recorder..................................................................................................................... 18

2.6.2.

Waveform Event Recorder .................................................................................................. 19

3. Construct and External Connection .................................................. 20
3.1.

Appearance & Dimension ......................................................................... 20

3.2.

Connector .................................................................................................. 22

3.3.

Typical Connections .................................................................................. 24

3.3.1.

Power Input Connection ...................................................................................................... 24

3.3.2.

Digital Input Connection ..................................................................................................... 24

3.3.3.

Digital Output Connection .................................................................................................. 25

3.3.4.

Current Input Connection ................................................................................................... 25

3.3.5.

Voltage Input Connection.................................................................................................... 26

4. Front Panel Operations .................................................................... 27

4.1.

Button & LED Description ........................................................................ 28

4.1.1.

LCD Display .........................................................................................................................28

4.1.2.

FTU Status ............................................................................................................................28

4.1.3.

MENU/UP/DOWN/ENTER Buttons .................................................................................28

4.1.4.

Serial Port (USB)..................................................................................................................28

4.1.5.

Ethernet/SCADA/Protection Communication Led ...........................................................28

4.1.6.

Battery Test Button & Indication ........................................................................................ 29

4.1.7.

Lamp Test Button ................................................................................................................ 29

4.1.8.

Reset Button ......................................................................................................................... 29

4.1.9.

Function Led ........................................................................................................................ 29

4.1.10.

RECLOSE/PROTECTION/GROUND Enable Buttons and LEDS ....................................30

4.1.11.

REMOTE/CONTROL LOCK Buttons and LEDS ...............................................................30

4.1.12.

SELECT/OPEN/CLOSE Buttons and LEDS ......................................................................30

4.2.
4.2.1.

LCD Manipulation .....................................................................................31
LCD Menu ............................................................................................................................ 32

5. Protection Functions ........................................................................ 37
5.1.

Fault Detection.......................................................................................... 37

5.1.1.

Definite Time Protection .................................................................................................38

5.1.2.

High Current Trip (HCT) ................................................................................................ 39

5.1.3.

Single Shot Operation ...................................................................................................... 39

5.1.4.

TC Curve .............................................................................................................................40

5.1.5.

Example of TC Curve Editing .............................................................................................. 42

5.1.6.

Auto Reclosing Sequence .................................................................................................... 44

5.1.7.

Sequence Coordination........................................................................................................ 46

5.2.

Cold Load Pickup ...................................................................................... 47

5.3.

Inrush Restraint ........................................................................................ 48

5.4.

Sensitive Earth Fault (SEF) Detection .................................................... 49

5.5.

Direction Detection ................................................................................... 52

5.6.

Negative Phase Sequence (NPS) Detection .............................................. 53

5.7.

Open Line Detection (Loss Of Phase) ....................................................... 54

5.8.

Phase Sync. Check ..................................................................................... 54

5.9.

Under Voltage Protection ......................................................................... 55

5.10.

Over Voltage Protection ............................................................................ 55

5.11.

Under Frequency Protection .................................................................... 56

5.12.

Over Frequency Protection ....................................................................... 56

5.13.

Hot Line Fault Protection ......................................................................... 56

5.14.

Analog Alarm ............................................................................................ 56

5.15.

Multiple Setting Groups............................................................................ 58

5.16.

Loop Automation Scheme......................................................................... 59

5.17.

Protection Trip Logic Diagram ................................................................. 60

6. Configuration Setting ....................................................................... 61
6.1.

I/O Configuration ......................................................................................61

6.1.1.

AC Rating ............................................................................................................................. 61

6.1.2.

Waveform Trigger ................................................................................................................ 62

6.1.3.

Demand Setting ................................................................................................................... 62

6.1.4.

Energy Profile....................................................................................................................... 62

6.1.5.

FI Reset Method ................................................................................................................... 63

6.1.6.

Close Interlock ..................................................................................................................... 64

6.1.7.

Voltage Display .................................................................................................................... 64

6.1.8.

Automatic Battery Check ..................................................................................................... 65

6.1.9.

FI Type Select ....................................................................................................................... 65

6.1.10.

Closing Delay ........................................................................................................................ 65

6.1.11.

Energy Counter .................................................................................................................... 66

6.2.

Power Quality Monitoring Function......................................................... 66

6.2.1.

Voltage & Current Unbalance ............................................................................................. 66

6.2.2.

Short-Duration Voltage Variation....................................................................................... 66

6.2.3.

Voltage & Current THD Alarm ............................................................................................ 69

6.3.

Communication......................................................................................... 70

6.3.1.

Port Parameters ................................................................................................................... 70

6.3.2.

DNP3.0 Parameters ............................................................................................................. 73

6.3.3.

IEC Parameters .................................................................................................................... 73

7. Status Monitoring & Control ............................................................ 75
7.1.

Switch (Recloser) Status Monitoring........................................................ 75

7.2.

Switch Control ........................................................................................... 76

7.3.

Battery & Battery Charger Monitoring ..................................................... 78

8. Measurements ................................................................................. 79

8.1.

Basic Electric Quantities ........................................................................... 79

8.2.

Sequence Components .............................................................................. 80

8.3.

Harmonics ................................................................................................. 80

8.4.

Energy ....................................................................................................... 80

8.5.

Demand currents and power .................................................................... 82

8.6.

Interrupter Duty Monitor ......................................................................... 84

9. Maintenance Software ..................................................................... 85
9.1.

Overview .................................................................................................... 85

9.2.

Operation of FTUMan ............................................................................. 86

9.2.1.

Menu .....................................................................................................................................86

9.2.2.

Toolbar ................................................................................................................................. 91

9.2.3.

Statusbar .............................................................................................................................. 92

9.2.4.

Monitoring bar ..................................................................................................................... 92

9.2.5.

Function and configuration Setting .................................................................................... 93

9.2.6.

Event ..................................................................................................................................... 95

9.2.7.

Measurement ..................................................................................................................... 103

9.2.8.

Waveform ........................................................................................................................... 109

10. I/O Configuration Tool .................................................................... 112
10.1.

Overview ................................................................................................... 112

10.2.

Operation of IOConfig ........................................................................... 113

10.2.1.

Menu ....................................................................................................................................113

10.2.2.

Toolbar ................................................................................................................................114

10.2.3.

Input .................................................................................................................................... 115

10.2.4.

Output.................................................................................................................................. 115

11. DNP3.0 Index Configuration Tool ................................................... 116
11.1.

Overview ................................................................................................... 116

11.2.

Operation of DNPConfig ....................................................................... 116

11.2.1.

Menu ................................................................................................................................... 118

11.2.2.

Toolbar ................................................................................................................................119

11.2.3.

Configuration Tool Box ..................................................................................................... 120

11.2.4.

Binary Input ........................................................................................................................121

11.2.5.

Binary Output..................................................................................................................... 123

11.2.6.

Analog Input....................................................................................................................... 124

11.2.7.

Counter ............................................................................................................................... 125

12. Waveform Evaluation Tool .............................................................. 127
12.1.

Overview ................................................................................................... 127

12.2.

Operation of EvalTool........................................................................... 128

12.2.1.

Menu ................................................................................................................................... 128

12.2.2.

Toolbar ............................................................................................................................... 130

13. IEC Index Configuration Tool .......................................................... 131
13.1.

Overview ................................................................................................... 131

13.2.

Operation of IECConfig ........................................................................... 131

13.2.1.

Menu ................................................................................................................................... 132

13.2.2.

Toolbar ............................................................................................................................... 133


Related documents


3 4 feeder terminal unit r200 manual v2 9 chardon 20150416
sst49lf020a
sst49lf002b
mdt pricelist
ichne 16 months
abb ach550

Link to this page


Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..

Short link

Use the short link to share your document on Twitter or by text message (SMS)

HTML Code

Copy the following HTML code to share your document on a Website or Blog

QR Code

QR Code link to PDF file 3. 4. Feeder_Terminal_Unit_R200_Manual_V2_9_Chardon_20150416.pdf