170530 Release Notes ISTA P 3.61.5 4.05.3x ENG .pdf

File information


Original filename: 170530_Release Notes ISTA-P_3.61.5_4.05.3x_ENG.pdf
Title: Document title
Author: Riemann Robert

This PDF 1.5 document has been generated by Microsoft® Word 2013, and has been sent on pdf-archive.com on 02/06/2017 at 14:40, from IP address 159.192.x.x. The current document download page has been viewed 2303 times.
File size: 343 KB (18 pages).
Privacy: public file


Download original PDF file


170530_Release Notes ISTA-P_3.61.5_4.05.3x_ENG.pdf (PDF, 343 KB)


Share on social networks



Link to this file download page



Document preview


Release Notes Programming
Passenger Cars
ISTA

4.05.3x

ISTA Service Data

4.05.32

ISTA/P

3.61.5

BMW Group
Release Notes Programming Passenger Cars, ISTA 4.05.3x

Page 2
of 18

List of contents
List of contents ................................................................................................................................................... 2
1

General notes ............................................................................................................................................. 3

2

Overview of the I levels contained.............................................................................................................. 4

3

Innovations ................................................................................................................................................. 6

4

Known faults F, G, I Series ......................................................................................................................... 7

5

4.1

ISTA 4 - Enabling code activations fail ............................................................................................... 7

4.2

ISTA/P - Note about switching off F, G, I series group ....................................................................... 8

4.3

G1x, G3x - KOMBI not programmable ................................................................................................ 9

4.4

ISTA/P calculates the special measures plan for EPS in F15, F16 .................................................. 10

4.5

All control units are assigned for exchange ...................................................................................... 11

4.6

Incorrect pop-up on invalid IP address during programming ............................................................ 12

4.7

Programming aborts due to antivirus software and firewall .............................................................. 13

4.8

Vehicle order import fails due to antivirus software and firewall ....................................................... 14

4.9

Invalid IP address for BN2020Ethernet control units ........................................................................ 15

4.10

Terminal 15 switches off during vehicle treatment ........................................................................ 16

4.11

ICOM connection fault is displayed during programming .............................................................. 17

Known faults E Series (ISTA/P) ............................................................................................................... 18
5.1

Manual import of vehicle order (central encoding key) fails .............................................................. 18

BMW Group

Page 3

Release Notes Programming Passenger Cars, ISTA 4.05.3x

1

of 18

General notes

With the launch of ISTA 4, the functionality for programming has been integrated in ISTA.
The following series can be dealt with using ISTA/P:


E Series



F, G and I series (will be switched off gradually from ISTA/P 3.62.0 on)

The following series can be dealt with using ISTA 4:


F, G and I Series

These Release Notes contain information for both programming systems.

The Release Notes list all known faults and faults that are currently still unresolved, with possible
workarounds which are important for the Retailer Organisation. Please contact Technical Support if
additional faults occur on the vehicle. In particular in the following cases:


vehicle-related programming faults / encoding faults and activation faults



functional faults on the vehicle

With ISTA 4, it is now also possible to send feedback relating to programming directly to BMW AG. Selecting
the "Feedback" symbol (envelope symbol) displays the feedback screen with input boxes.

If a new fault pattern is included in a release, this is indicated in the heading with * NEW *.
This is no longer indicated in the follow-up release.

BMW Group

Page 4

Release Notes Programming Passenger Cars, ISTA 4.05.3x

2

of 18

Overview of the I levels contained

F, G, I Series (ISTA 4, ISTA/P)
Series group

I level

F001 (F0x, RR4, RR5)

F001-17-03-505

F010 (F06, F1x)

F010-17-03-505

F020 (F2x, F3x, F80, F82, F83, F87)

F020-17-03-509

F025 (F15, F16, F25, F26, F85, F86)

F025-17-03-510 – ISTA 4
F025-17-03-508 – ISTA/P

F056 (F4x, F5x, F6x)

F056-17-03-507

S15A (G1x, G3x, RR1x)

S15A-17-03-509

S15C (G38)

S15C-17-03-506

I001 (I03, I08)

I001-17-03-507

I levels correspond to the ISTA Service Data version on the front page.

E Series (ISTA/P)
Series group

I level

E065 (E65, E66)

E065-15-07-500

E060 (E60, E61, E63, E64)

E060-16-11-500

E070 (E70, E71, E72)

E070-16-11-500

E89x (E81, E82, E84, E87, E88, E89, E90, E91, E92, E93)

E89x-16-11-500

R056 (R55, R56, R57, R58, R59, R60, R61)

R056-17-03-504

RR01 (RR1, RR2, RR3)

RR01-17-03-500

BMW Group
Release Notes Programming Passenger Cars, ISTA 4.05.3x

Page 5
of 18

Info on the integration levels
PuMA measures or similar documents sometimes refer to an I level for the solution to a problem.
In this case it is important to know which ISTA release contains the I level.
The name of the I level indicates, if it
1. is contained in the current ISTA release
2. was already contained in a previous ISTA release or
3. will be provided in a future ISTA release.
Series group e.g. F020 - year 2017 - month (3, 7 or 11) - version (>= 500)
Assuming the current release contains:

S15A-17-03-506

Then the following I level is not available yet:

S15A-17-07-501

Then this I level was already contained in an older ISTA release:

S15A-16-11-503

Then this I level was already contained in an older ISTA release:

S15A-17-03-505

BMW Group
Release Notes Programming Passenger Cars, ISTA 4.05.3x

3

Innovations

The following interesting innovations are included, amongst others.

ISTA 4 and ISTA/P
Multi-session capability of ISTA 4
Benefit: Execution of several programming sessions or diagnosis sessions on one device.
Possible from this version on.
Operating manuals under Help button [?] in ISTA header.

New models with production date
Benefit: The new G01, G32, RR11, RR12, G38 can be dealt with.
Vehicles: G01, G32, RR11, RR12, G38

Update of navigation maps in ISTA 4
Benefit: Update of the map data by ISTA 4 in motor vehicles with navigation system.
Planned for ISTA 4.06.1x. Up to then, the update can be performed with ISTA/P.

Page 6
of 18

BMW Group
Release Notes Programming Passenger Cars, ISTA 4.05.3x

4

Known faults F, G, I Series

4.1 ISTA 4 - Enabling code activations fail
Fault description:
The activation of enabling codes for control unit exchange or retrofitting, like e.g. Power Kits, fails.
Model series affected:
F, G, I series vehicles.
Measure/workaround:
Use ISTA/P.
Fault corrected by:
Expected with ISTA 4.06.1x
Affected application:
ISTA 4

Page 7
of 18

BMW Group
Release Notes Programming Passenger Cars, ISTA 4.05.3x

Page 8
of 18

4.2 ISTA/P - Note about switching off F, G, I series group
Description:
With the launch of ISTA 4, the functionality for programming the F, G, I series has been integrated in ISTA.
From ISTA/P version 3.62.0 on (end of June 2017), the programming of the F, G, I series with ISTA/P will be
gradually switched off.
Model series affected:
F, G, I series vehicles.
Action:
Install ISTA 4 with vehicle software service data package.
Use ISTA 4 for programming the F, G and I series.
Affected application:
ISTA/P
Note:
E series can still be dealt with using ISTA/P.

BMW Group
Release Notes Programming Passenger Cars, ISTA 4.05.3x

4.3 G1x, G3x - KOMBI not programmable
Fault description:
The KOMBI type IC_MID-JCI cannot be programmed.
Model series affected:
Vehicles G1x, G3x with KOMBI IC_MID-JCI.
Measure/workaround:
Contact Technical Support.
Fault corrected by:
Currently open
Affected application:
ISTA/P
ISTA 4

Page 9
of 18


Related documents


170530 release notes ista p 3 61 5 4 05 3x eng
releasenotesistaprogrammingp36424113xen gb
ista usermanual en gb
11 5 series
m6
95 c4 cab

Link to this page


Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..

Short link

Use the short link to share your document on Twitter or by text message (SMS)

HTML Code

Copy the following HTML code to share your document on a Website or Blog

QR Code

QR Code link to PDF file 170530_Release Notes ISTA-P_3.61.5_4.05.3x_ENG.pdf