pla nx2 datasheet .pdf
File information
Original filename: pla nx2 datasheet.pdf
Title: pla nx2 datasheet.pdf
This PDF 1.7 document has been generated by Serif Affinity / PDFlib+PDI 9.0.5-i (Mac OS X-10.9 64), and has been sent on pdf-archive.com on 10/07/2017 at 13:38, from IP address 80.110.x.x.
The current document download page has been viewed 556 times.
File size: 192 KB (1 page).
Privacy: public file
Share on social networks
Link to this file download page
Document preview
Extrudr PLA NX2 – 3d Printing Filament
Speed vs. Temperature
Description
Extrudr PLA filament is a biopolymer made of
100% renewable resources containg sugar and
starch.
220
°C
215
210
Application
The variety of products made with PLA is growing every day. Applications include cutlery, cups,
plates, cosmetics, toys and outdoor novelties. This
PLA meets the U.S. & EU- Plastics Regulation and
therefore can be used for food packaging.
205
mm/s
200
50
65
80
95
110
125
TESTED WITH MAKERBOT 2X
Settings
Extruder:
Print on:
Speed:
Storage and Shelf Life
Store at around room temperature (18 to 27 °C
[65–80 °F] ) and protect from direct heat or
sunlight. Keep sealed in an air tight container,
away from humidity.
195 - 220 °C
Bluetape
up to
120mm/s
less than 0.5 %
Low shrinkage:
Available Sizes
Diameter
1 ,75
2,85
1 ,75
2,85
Specific weight
1,3 g/cm3
1,3 g/cm3
1,3 g/cm3
1,3 g/cm3
Weight
1 500 g
1 500 g
3500 g
3500 g
Net weight
1 1 00g
1 1 00g
2500g
2500g
Technical Support
Properties
Tensile Strength
Tensile Elongation
Flexural Modulus
Flexural Strength
3,5% Izod Impact Strength
VICAT A (VST)
MFR
Melting Temperature
Test Method
ISO 527
ISO 527
ISO 527
ISO 178
ISO 178
ISO 306
ISO 1133
ISO 3146-C
Unit
Mpa
%
MPa
MPa
ft-lb/in (J/m)
°C
g/10 min
°C
Copyright 2017 extrudr, all rights reserved
Höchsterstrasse 81 , 6972 Fussach, Austria.
FN 41 2622y | UID ATU685701 47 | ATEOS1 00061 094
you should not disseminate, distribute or copy this document
Contact us regarding any questions,
improvement suggestions, or problems with this product.
-
Value
47
4
2650
no break
64
60
2,5 - 4,5
150-170
Our mailing address is:
info@extrudr.eu
www.extrudr.eu
Related documents
Link to this page
Permanent link
Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..
Short link
Use the short link to share your document on Twitter or by text message (SMS)
HTML Code
Copy the following HTML code to share your document on a Website or Blog
QR Code
