Improve Job Management with the Right Cutting Tool.pdf

Preview of PDF document improve-job-management-with-the-right-cutting-tool.pdf - Page 1/3
Improve Job Management with the Right Cutting Tool
Cutting tools is the machine or tool which is used to cut and remove the material from
the piece of a material that needs to be cut. There are two types of point in these cutting
tools, i-e, single point or the multiple point tools. The single pointed tools are used for
the shaping, cutting, turning and planning the material, whereas the multiple points are
for the drilling and milling purpose. These tools have the harder surface so that they can
endure any hard material and heat during the cutting process.

Some of the advantages of the cutting tools are:
• They are efficient in their work.
• These tools are cost-effective.

Improve Job Management with the Right Cutting Tool
• They have the high working life.
• They are resistant to heat and have the higher resistance to wear and tear.
• Gives you a better surface finish.
• These tools are durable.
• They are less expensive except for some of the tools.
There are different types of cutting tools some of which are:
• Metal Cutting- these tools are used to cut the metal and these tools has to be very

hard and strong. They need to be replaced or changed after a short time because of
their use and the early wear and tear. The example of the metal cutting tools is
• Leather Cutting- the leather cutting tools don’t have to be very hard. These tools

are used in the leather industries; some of these tools include the knives, swivels,
and cutters.
• The glass cutting tools- these tools have to be such as to not break the glass. As

the glass in a weak piece, its cutting can be very tricky. The glass cutting tools are
of different sizes, depending upon its use. One small mistake can cause you a high
price while cutting the glass. It is also used for the scoring of the glass.

Improve Job Management with the Right Cutting Tool
The types of the material for the cutting tools are:
• Cermet- it is stable and cheap material.
• Cemented Carbide- it is stable and cheap material.
• Diamond- it is stable yet very expensive.
• Cobalt Alloy- it’s expensive and very stable.

This is the wide variety of material and types of the cutting tools that can make our job
management easy and efficient. With these options we have the wide variety of tools
such as the diamond saw blades, TCT saw blades, jack saw blades, hacksaw blades,
bimetal blades and many more. Each of these blades has the particular job and technique
which can save our time and make our work easier.



  • Format: PDF 1.4
  • 134 KB, 3 pages
  • Sent on 07/09/2017 at 15:29
  • Privacy: public file
  • Download page viewed 29 times
  • Created by: Writer
  • Resolution: 612 x 792 pts (letter)