Robotic Arm Packet (PDF)




File information


This PDF 1.6 document has been generated by Adobe Acrobat Pro 10.1.1, and has been sent on pdf-archive.com on 11/09/2017 at 15:05, from IP address 40.131.x.x. The current document download page has been viewed 789 times.
File size: 3.6 MB (31 pages).
Privacy: public file
















File preview


SolidWorks
A Step-By-Step Guide
This packet will lead you through how to use the software program SolidWorks.
In this packet, you will find screenshots, step-by-step tutorials, and example
projects. I hope this packet will help you learn more about 3D Parametric
Modeling using the program SolidWorks.

Intro to Engineering
Meadville Middle School
Mr. Boyle

Getting Started
This page will show you how to open up SolidWorks and
create a new Part File.

Step 1 - Open Solidworks

Begin by Double Clicking on the SolidWorks 2013 Icon on your Desktop.
You may also click “Start” and search “SolidWorks” to find the program.

Step 2 - New Document

Click on the “New Document” tab in the upper
left corner of the screen. You can also move
your mouse over where it says “Solidworks”
and you can click “File” then “New”.

Step 3 - Document Type

The following window will then show up. Here you have three options for a new document.
You can select Part, Assembly, or Drawing. We will go over each one of these document types
in this packet, but for now, select “Part” and click “OK”.

Navigate Views

In this tutorial, we will go over different ways to view your
project. For this tutorial, we will be using a sample part.
Step 1 - Open Part
Begin by opening the filename “GearExample”. You can do this
by clicking the “Open File” icon in the upper left corner. Find
the document “GearExample” and open it.

Step 2 - Zoom in and Zoom Out

Begin by experimenting with Zooming in and
Zooming out. Do this by scrolling forwards and backwards using your mouse wheel. If at any time you
have lost your part or want to go back to the original
view click the “Zoom to Fit” button found in View
ToolBar in the top middle of the page or press “F”.

Step 3 - Change Views

To change to a specific view of the part, click on
the “View Orientation” button in the View Tool Bar.
A small window will appear with cubes showing
different sides colored. Each cube represents a
different view of the part. Experiment by clicking on
different views. If you ever need to go back to the
original view, click on the cube that is fully colored in,
that will bring you back to your Isometric view. You
can also click your mouse wheel to rotate the part.

Create a Sketch
Before we build any 3D Parts, we first need to make a 2D
Sketch. This tutorial will show the basics of 2D Sketching in
Solidworks. Begin by opening a new Part document.

Step One - Select Sketch Plane

Begin by clicking on the “Extruded/Boss Base” icon
in the upper left corner of the Tool Bar. Three sketch
planes will show up click on the plane you want to work
on.

Step Two - Begin Sketching

To begin Sketching, click on the “Corner Rectangle” Tool. Now click on
the vertex in the middle of the page and move your mouse towards the
upper right part of the screen to form a rectangle. Click again to create
the rectangle. Press “ESC” on your keyboard to exit the Rectangle Tool.
At this point you can click and drag any of the edge of your rectangle to
adjust it’s size.

Step Three - Dimensioning

We now need to add dimensions to our Rectangle. Begin by clicking the “Smart Dimension”
Icon in the Sketching Tool Bar. Now click on any side of your rectangle and move your mouse
outwards, you will see a number appear with some arrows. Click again and a window will
pop up. In this window you will type in the
dimension you want then press Enter
or cick the green check mark.

What is Fully-Constrained?

You will notice when you add enough
dimensions, the lines of your sketch will turn
from blue to black. This indicates your sketch is
fully constrained. This means there are no more
dimensions needed and every dimension in
that sketch has been defined.

Extrusions

Now that you have created your first 2D Sketch, we will now
make an Extrusion which will add depth and make it a 3D part.
Step One - Create a Sketch

Begin by creating a sketch using the rectangle tool like we did in the last tutorial.

Step Two - Exit Sketch and Change View

Click the “Exit Sketch” button in the top left corner of the
screen. The view will normally change and put you back into
3D mode, if the view doesn’t change, use your navigation
tools to go to your original Isometric view.

Step Three - Define Extrusion Depth

In the left side of the screen a new window should have appeared
that says “Boss-Extrude” at the top. This window allows you to
specificy the depth of your extrusion. Look for the icon that says
“D1” and has a double sided arrow beside it, this is where you
define the distance of your extrusion. Type in 1.50 nand click
the green check mark to activate the Extrusion. You have now
completed your first 3-Dimensional object.

Making Additional Extrusions

You can make additional extrusions on the faces of your
part. When doign this, follow the same steps as above,
the only difference is you might have to change your
views manually.

0

12.00

0.5

Part 1 - Arm

Intro to Engineering - Robotic Arm

5

4.25

0.7

Part 2 - Pivot Rod

Intro to Engineering - Robotic Arm

75

4.50

0.3

Part 3 - Rotation Arm

Intro to Engineering - Robotic Arm

5

3.00

0.37

Part 4 - Rear Pivot Rod

Intro to Engineering - Robotic Arm






Download Robotic Arm Packet



Robotic Arm Packet.pdf (PDF, 3.6 MB)


Download PDF







Share this file on social networks



     





Link to this page



Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..




Short link

Use the short link to share your document on Twitter or by text message (SMS)




HTML Code

Copy the following HTML code to share your document on a Website or Blog




QR Code to this page


QR Code link to PDF file Robotic Arm Packet.pdf






This file has been shared publicly by a user of PDF Archive.
Document ID: 0000672162.
Report illicit content