Dante Audio Networking Card 71.98.2950 1.0 .pdf
Original filename: Dante_Audio_Networking_Card_71.98.2950-1.0.pdf
Author: De Ruyck Bart
This PDF 1.4 document has been generated by Acrobat PDFMaker 15 for Word / Adobe PDF Library 15.0, and has been sent on pdf-archive.com on 10/11/2017 at 15:53, from IP address 123.231.x.x.
The current document download page has been viewed 176 times.
File size: 4.1 MB (1 page).
Privacy: public file
Download original PDF file
DATASHEET – DANTE AUDIO NETWORKING CARD
Dante Audio Networking Card
Using the Dante™ controller software, the audio
can easily be routed between the Dante™enabled devices available on the network. In
combination with Audinate's virtual soundcard
and Televic’s TReX software, a PC can be turned
into a multichannel recording station, simply by
connecting the network port of this PC to the
network. This solution is incredibly cost-effective
because no audio interfacing equipment is
The Dante™ Audio Networking Card is a plug-in
card that fits inside the Plixus MME and Plixus AE
and provides a user-friendly digital audio
distribution interface that makes audio
networking quick and painless.
Digital audio distribution eliminates a myriad of
inflexible copper wires and interfacing equipment.
Instead, the installation is simplified using digital
networking. A single lightweight, inexpensive Cat
5e cable can carry 64 inputs and 64 outputs as
digital audio data.
Dante is built on top of IT standards and is a
complete, integrated media networking solution.
It delivers low-latency, tightly synchronized,
sample-accurate audio while simplifying the
installation and configuration of AV networks.
Since Dante™ runs on inexpensive, off the shelf
computer networking hardware, existing network
infrastructure can simply be preserved.
As a result, the conference system can effortlessly
interconnect to Dante™ enabled third-party
devices such as DSPs, audio mixers, break in and
break out interfaces or recording devices.
After it is installed in a network, Dante™-enabled
products are automatically discovered, resulting in
a plug and play audio networking solution.
Features & Benefits
Easy and cost effective audio interfacing
Plug and play setup
Runs over standard network
Auto-discovery of Dante™ enabled
devices in the network
Flexible audio routing through the
Dante™ controller software
Virtual soundcard turns your PC into a
multichannel recording device.
Mini-PCI form factor module to be installed in a
Plixus MME (71.98.2900) or Plixus AE
All information copyright Televic Conference,
2015. Version 1.0, October 2015
Leo Bekaertlaan 1 · 8870 Izegem · Belgium
Tel. +32 51 30 30 45
Fax +32 51 31 06 70
Televic reserves the right to change this document
Dante™ is a trademark of Audinate Pty Ltd, Audinate™ is a registered trademark of Audinate Pty Ltd.