PDF Archive

Easily share your PDF documents with your contacts, on the Web and Social Networks.

Send a file File manager PDF Toolbox Search Help Contact



switching surge protection device .pdf


Original filename: switching surge protection device.pdf
Author: user

This PDF 1.5 document has been generated by Microsoft® Office Word 2007, and has been sent on pdf-archive.com on 28/11/2017 at 08:25, from IP address 103.30.x.x. The current document download page has been viewed 86 times.
File size: 457 KB (2 pages).
Privacy: public file




Download original PDF file









Document preview


Leading The Nation Towards Electrical Safety

Surges and transients are common in transmission line which is generated during
fault, lightning and switching etc. These are sometimes much higher that devices
which is working within it gets damage permanently.
Small surges which flow into the live lines tend to decrease the life and stability
slowly. It is difficult to control the transients and surges flowing into the AC mains,
so we need to divert it to the ground using a suitable device known Surge
protection Device. It is also known as Surge Suppressor. For homes and industry
we are having SPD for AC mains which protect appliances from Lightning and
switching. These surges change the fundamental characteristics of Voltage and
frequency either within or out of amplitudes. Class C or Type II is a SPD for
switching only and Class B+C or Type I+II are used for lightning cum switching
protection. These devices are available for both three phase and single phase AC
power supply.

Leading The Nation Towards Electrical Safety

Our SPD comply with IEC 61643-1 & UL 1449 standard, having PA 6 housing
material. IT provides an IP 20 degree of protection. It can operate up to 230-320V.
The best part of our surge protection device is that it is having an 8/20µs which
offers better stability. Our surge protection device characteristics can be
customized as per customer needs. Switching protection devices comes under
lightning protection zone 1-2. It can handle the maximum surge current of 40kA.

You are at Right Place
Facing problem from switching and transients, you are at right place. We having
more than 20 different application based surge protection device from AC mains
to the telephonic system, not only to telephonic but to signal and oil and gas
industries. Our switching surge protection device is the best SPD that protects
from switching. We are the leading SPD manufacturer in innovation.

In The End
Switching surge protection device is a device which protects our AC appliances
from heavy switching under protection zone 1-2. Its work is to eliminate the
switching surge to ground and safe our AC appliances from it.


switching surge protection device.pdf - page 1/2
switching surge protection device.pdf - page 2/2

Related documents


PDF Document switching surge protection device
PDF Document signal surge protection devices
PDF Document surge protectionswitching pdf
PDF Document solar photovoltaic surge protection device
PDF Document surge protection device
PDF Document solar surge protection device


Related keywords