How to Clean the Rollers of the HP Printer .pdf
Original filename: How to Clean the Rollers of the HP Printer.pdf
This PDF 1.4 document has been generated by Writer / LibreOffice 5.3, and has been sent on pdf-archive.com on 21/12/2017 at 13:21, from IP address 146.196.x.x.
The current document download page has been viewed 117 times.
File size: 125 KB (2 pages).
Privacy: public file
Download original PDF file
How to Clean the Rollers of the HP
Imagine printer without a feeding mechanism that does not involve a roller? You
can’t, can you? Without rollers, there is no printout, and without properly
maintaining them, there is no proper printout. When it comes to HP Printers, also
known as the most accessible printing devices ever built; the versatility of these
“wheels” from the foundation on which the device runs nice and proper. With
long usage, these components get dirty. As a consequence, you are definitely
going to be encountering issues like wrong alignment, paper jamming etc. To that
end, properly cleaning the rollers of the HP Printer is your best option. Is cleaning
process easy enough to be accessible by anyone? Or you definitely need expert
hands to deal with them?
According to HP Printer Support Ireland, the cleaning process is
a piece of cake
It is the smoothness of these rollers that allow the pages to input in a straight,
optimum and consistent fashion. Dirt and grime remove this smooth factor and
the result is a non-consistent, un-optimal and a bent printout. But do not worry!
The following steps will help you remove such contaminations in a rather easy
1. Turn off the device:
Trust us, under no circumstance should there be allowed any
electrical interference during the maintenance process. To that end,
Turn off the device and disconnect all the power chords.
2. Open the cover
Once there is no interference, you can remove the cover to expose
the print rollers.
3. Remove any paper swill present
Free the roller by removing any residual or full paper from the “in”
and the “out” tray.
4. Get a wet cloth and start cleaning
Once you get the roller exposed, you will see a steel bar with three
wheels. Clean the three rollers manually using a wet cloth.
5. Get a new set of print sheets
Now, you need to get a new set of print sheets to load up in the
system tray. Make sure that the new ones are clean.
Once you have cleaned these “wheels” you can be damn sure that the printouts
that you will receive now will be nothing short of amazing.
The above steps are easy to understand and easier to comprehend. But still, if you
encounter any issue you can contact our experts via our HP printer helpline
number +353-766803285. Our specialists will not only assist you through this
entire process, but they will also avail you with some solutions for some other
issues you might encounter.