HID Kit Installation Instructions (PDF)




File information


Title: HID Kit Installation Instructions without relay
Author: https://www.hidsrus.com/

This PDF 1.7 document has been generated by PDFescape Desktop / GPL Ghostscript 9.0, and has been sent on pdf-archive.com on 16/01/2018 at 09:56, from IP address 185.51.x.x. The current document download page has been viewed 403 times.
File size: 392.68 KB (9 pages).
Privacy: public file
















File preview


HID Kit Installation Instructions
888-207-6830 Edited by https://www.hidsrus.com/
Bulb Type installation:
Single beam model, so it should be one of these types:
H1/H3/H4(HB2)/H7/H11/9004/9005(HB3)/9006(HB4)/9007/880/881/893/D2C/R/S, ect.
Please follow these steps for installation:
Please familiarize yourself with the following parts to your HID KIT:
2- Single Beam HID Bulbs
2- Ballasts
2- Harness extensions
Hardware/3M tape/Ballast Brackets

Step 1
Disconnect Negative Battery Cable

Step 2
Locate back of driver side headlight, disconnect headlight harness from bulb
(If there is a dust cover or rubber cover over bulb please remove that at this time)

Step 3
Remove halogen bulb from headlamp

Step 4
Remove plastic housing from HID bulb
NEVER TOUCH THE HID BULB

Step 5
Install HID bulb in place of Halogen bulb

Step 6
If you would like to lengthen the headlight harness for easier installation, please locate the
extension wire in the kit at this time and connect the female (blue end) to the original
headlight harness.

Step 7
If you used the headlight harness extension, please connect the male (black) end to the female
end of the ballast.
If you did not use the headlight harness extension, please connect the original headlight
harness to the male (black) end of the ballast.

Step 8
Connect HID Bulb to the ballast.
The HID bulb will have a male and female wire coming out the back of the bulb.
The ballast will have a female and male wire.
Connect male to female wires for both negative and the positive.

Step 9
Mount Ballast with bracket, tape, or hardware provided
If using the 3M tape provided, please clean the surface of both the car and the ballast before
applying the tape.

Step 10
Use zip ties provided in your kit to secure wires out of the way from moving parts.

Step 11
Repeat steps ( 3 through 10 ) for installation on passenger side headlight.

Step 12
Connect Negative Battery cable

Step 13
Start vehicle, turn headlights on






Download HID Kit Installation Instructions



HID_Kit_Installation_Instructions.pdf (PDF, 392.68 KB)


Download PDF







Share this file on social networks



     





Link to this page



Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..




Short link

Use the short link to share your document on Twitter or by text message (SMS)




HTML Code

Copy the following HTML code to share your document on a Website or Blog




QR Code to this page


QR Code link to PDF file HID_Kit_Installation_Instructions.pdf






This file has been shared publicly by a user of PDF Archive.
Document ID: 0000721432.
Report illicit content