PDF Archive

Easily share your PDF documents with your contacts, on the Web and Social Networks.

Share a file Manage my documents Convert Recover PDF Search Help Contact



Deck Roll Forming Machine .pdf



Original filename: Deck Roll Forming Machine.pdf

This PDF 1.7 document has been generated by , and has been sent on pdf-archive.com on 01/02/2018 at 08:52, from IP address 153.126.x.x. The current document download page has been viewed 523 times.
File size: 2 MB (5 pages).
Privacy: public file




Download original PDF file









Document preview


Deck Roll Forming Machine

Website: http://www.rishbin.com/products/deck-roll-forming-machine/

Deck Roll Forming Machine
Deck is a flat surface capable of supporting weight, similar to a floor, but typically constructed outdoors, often elevated from the
ground, and usually connected to a building. Steel deck metal sheet forming machines have been designed for the production of
various types of metal decks which applications are usually as following: Steel roof deck, Steel floor deck, Comflor deck is also one
of the most popular one. The configuration or components of each machine vary accordingly, for example, some deck machine
have embossing rolling tools while some others do not. The whole deck roll forming machine line is including decoiler, roll forming
machine, hydraulic power pack, hydraulic shear, electric controller and run out table; motorized decoiler with hydraulic expansion,
also coil car is optional; Bomb type auto stacker is also available.

Website: http://www.rishbin.com/

Deck Roll Forming Machine
• Steel Deck Roll Forming Machine
• Comflor Deck Roll Forming Machine
• Floor Deck Roll Forming Machine
• Roof Deck Roll Forming Machine

Deck Production
The steel deck is a cold-formed corrugated steel sheet supported by steel joists or beams. It is used to support concrete or insulating membrane of a roof. Structural metal
panel roof systems are installed over a large variety of substrates. There are two general categories of substrates: one is continuous or closely spaced decking that provides
solid support for the metal roof panel, the other is composed of spaced structural supports (such as purlins) where metal panels must span between supports. Most
structural metal panels are used over spaced structural supports without being supported by a solid roof deck. It was developed to provide a structurally efficient product
for use in roof and floor systems. Its design and fabrication maximize the properties of the steel in order to create a high strength-to-weight ratio, which lowers the material,
handling, and erection costs but maintains the durability that has been proven by over 50 years of satisfactory performance.
Steel deck could be roof deck and composite floor deck as their different application using.
Roof deck products are typically used as the structural component of many flat, pitched, or arched roof systems because of their benefits with regards to strength, weight,
and economy. It is commonly attached to open web steel joists, structural steel, or light gauge framing.
Composite floor deck is designed for use with structural concrete and is manufactured with mechanical embossments in the webs to create the mechanical and chemical
bond between the deck and the concrete.
The composite action allows the deck to serve as the tensile reinforcement for positive bending in the slab, which significantly reduces or eliminates the need for rebar in
the slab and lowers material and labor costs.
According to deck profiles characteristics, metal deck roll forming machine for producing different types of decks are being designed and built. Including roof deck machine,
composite floor deck machine, even popular Comflor deck machine, both 2 waves and 3 waves are optional. Not only deck profiles could be different, but also machine
specifications could be customized, such as transmission type, gear drive or chain drive; stop cut or flying shear; plain run out table or auto stacker (Bomb type); decoiler to
be manual operation or automatically; they are all being made based on real requirement.

Website: http://www.rishbin.com/

We are looking forward to your cooperation!

RISHBIN WUXI CO., LTD.

Contact: Chris Ho Email: info@rishbin.com Skype: tinatech_chris Tel: 86-510-85853379

Wechat: 18626315075


Related documents


PDF Document deck roll forming machine
PDF Document roll formiomg machine
PDF Document purlin roll forming machine
PDF Document downspout roll forming machine
PDF Document steel frame machine
PDF Document high speed z purlin machine


Related keywords