slitting line .pdf
Original filename: slitting line.pdf
This PDF 1.7 document has been generated by , and has been sent on pdf-archive.com on 01/02/2018 at 08:49, from IP address 153.126.x.x.
The current document download page has been viewed 152 times.
File size: 1.2 MB (5 pages).
Privacy: public file
Download original PDF file
Steel Slitting Line
Steel Slitting Line
Metal sheets or strips suppliers always need slitting machine and cut to length machine line for the production of metal sheets with different widths
or lengths from GI, PPGI, or stainless coils in large quantities. A steel mill most of time produces only wide steel coils, and steel or metal fabricators
always use a slitting and cut to length machine line to manufacture steel strips with different widths or metal sheets with fixed lengths. A metal
slitting machine line has been designed to cut longitudinally the wide steel coils into different narrow steel strips for continuously producing cold
formed sectional steel products. Basically there are two types: high-speed and normal-speed slitting machine line. High-speed slitter can works at
max speed over 150 m/minute and over 10 strips can be produced; while a normal-speed slitting machine can work at most 40m/min with less than
10 strips slit.
COLD ROLL STEEL SLITTING LINE
HOT ROLL STEEL SLITTIG LINE
SIMPLE STEEL SLITTING LINE
CUT TO LENGTH LINE
COMBINED STEEL SLITTING & CUTTING TO LENGTH LINE
Pictures of Steel Slitting Line
Being an important part of the steel coil processing area, steel slitting lines are to slit steel coil from 0.2mm to 6mm thickness material and in width starting from 50mm to
2000mm. All grades of hot rolled steel, cold rolled steel, galvanized steel coils, stainless steel coil, as well as pre-painted materials. Many high-quality knives cut the steel sheet
into narrow strips, which may be coiled again after rewinding. The cutting blades could be set to a required width.
The steel slitter normally consists of three main parts: decoiler with coil car, slitter, and recoiler with coil car. But it will be much more complicated with other equipment, such as
leveler, tension device, The steel is fed from the uncoiler, through the nip between the two circular cutting wheels (one on top and another underneath), and then re-wound in
slit pieces on the recoiler.
To be built according to the real requirement, steel slitting machine could be made as to cut different thickness and width steel coil. The machine running speed is another key
performance; high speed up to 200 meters per minute will be required high-quality machine parts and automation.
The use of eccentric adjustment mechanism employed on slitter housing ensures a high level of slitting accuracy. The uncoiler can accommodate all types of standard coil bores
on expandable opposed drums for heavy load and damage free operation. Coil cars are provided on both sides for the trouble-free remote handling of input and outputs coils.
Scrap winders are driven by hydraulic motors for automatic speed and load control operation. Coil cars are provided on both sides for the trouble-free remote handling of input
and outputs coils. Scrap winders are driven by hydraulic motors for automatic speed and load control.
Cut to length is required sometimes separately as requiring steel sheet, and sometimes combined with slitting, when cutting into several different coils, or different quantity
should be made.
As a professional slitting line manufacturer, Rishbin offers high quality slitting machines for worldwide customers!
We are looking forward to your cooperation!
RISHBIN WUXI CO., LTD.
Contact: Chris Ho Email: email@example.com Skype: tinatech_chris Tel: 86-510-85853379